699459
15
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
SATEL VERSA 13
“Bypassed zones 1=Arm” – if you don’t have the ZONE INHIBITION right. You can:
– press the key to cancel the arming,
– press the key to proceed with the arming.
6.3.7 Denial of arming and forced arming
The installer can configure the control panel so that initiating the arming procedure is
impossible, if:
in the partition to be armed, at least one zone that must not be violated during arming (the
PRIORITY option has been enabled for the zone by the installer) is violated,
in the partition to be armed, at least one alarm zone is violated beyond the exit route,
there is trouble in the system.
If you have the INSPECTION right, you will be informed about the cause of refusal to arm the
system (the order of message descriptions corresponds to their priority):
“Zone [zone number] violat.” – a zone with enabled PRIORITY option is violated. If two or
more such zones are violated, the indicator will be flashing on the display. To scroll
through the list of violated zones, use the and keys. You can:
– press the key to cancel the arming,
– press the key to inhibit the violated zone (you must have the ZONE INHIBITION
right). A message will be displayed, prompting you to confirm the command to inhibit the
zone (press to inhibit the zone, or to cancel inhibiting the zone).
The system can be armed after eliminating the cause of the zone violation, or after
bypassing the zone.
“Violated zones 1=Ok 2=Check” – an alarm zone outside of the exit route is violated. You
can:
– press the key to cancel the arming,
– press the key to force the arming,
– press the key to check which zone is violated. If two or more such zones are
violated, the indicator will be flashing on the display. To scroll through the list of
violated zones, use the
and keys. If you have the ZONE INHIBITION
permission, you will be able inhibit the violated zone by pressing . A message will
be displayed, prompting you to confirm the command to inhibit the zone (press to
inhibit the zone, or to cancel inhibiting the zone).
“Troubles 1=Ok 2=Check” – there is a trouble in the system. You can:
– press the key to cancel the arming,
– press the key to force the arming,
– press the key to view the trouble log – the 7. SYSTEM STATE function will start
(see: “Checking the troubles / system state” p. 30).
Information on the forced arming is written into the event log.
6.3.8 Failure of arming procedure
The installer can configure the alarm system in such a manner that it will not be armed, if at
the moment of completing the exit delay countdown:
there is a violated zone in partition which was not violated when the arming procedure was
started,
there is a trouble which did not exist when the arming procedure was started.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel VERSA 10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel VERSA 10 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel VERSA 10

Satel VERSA 10 Snelstart handleiding - Nederlands - 11 pagina's

Satel VERSA 10 Gebruiksaanwijzing - Nederlands - 44 pagina's

Satel VERSA 10 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 10 Aanvulling / aanpassing - Nederlands - 86 pagina's

Satel VERSA 10 Installatiehandleiding - Nederlands - 35 pagina's

Satel VERSA 10 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 10 Snelstart handleiding - Deutsch - 11 pagina's

Satel VERSA 10 Aanvulling / aanpassing - Deutsch - 89 pagina's

Satel VERSA 10 Gebruiksaanwijzing - Deutsch - 44 pagina's

Satel VERSA 10 Installatiehandleiding - Deutsch - 37 pagina's

Satel VERSA 10 Snelstart handleiding - Deutsch - 2 pagina's

Satel VERSA 10 Snelstart handleiding - English - 11 pagina's

Satel VERSA 10 Aanvulling / aanpassing - English - 87 pagina's

Satel VERSA 10 Installatiehandleiding - English - 36 pagina's

Satel VERSA 10 Gebruiksaanwijzing - English - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info