699464
12
Verklein
Vergroot
Pagina terug
1/31
Pagina verder
10 PERFECTA SATEL
6.2.1 Factory default codes
By default, the following codes are preprogrammed in the control panel:
user 15 code: 1111
service code: 12345
The factory default codes should be changed before you start using your alarm
system (see: “Changing code”).
6.3 Arming
Completion of the steps below will start the arming procedure. The procedure ends when the
exit delay time elapses (if the procedure is completed successfully, the system becomes
armed – see also “Failure of arming procedure”). If the exit delay time is 0, the system
becomes armed instantly.
The day/night arming modes are available if the installer has defined which zones are
to be active in this armed mode.
During the exit delay countdown, you can leave the partition through the exit route
without triggering alarm.
6.3.1 Arming without partition selection
Enter the code, and then press:
- to arm in full mode,
- to arm in day mode,
- to arm in night mode.
In the partitions you have access to, the arming procedure will begin.
6.3.2 Arming the selected partition
1. Select the partition which is to be armed (press one of the keys: - partition 1; -
partition 2).
2. Select the arming mode (press one of the keys:
- full arming; - day arming;
- night arming). Backlight of the keys will start flashing, which indicates that the code
must be entered.
3. Enter the code.
4. Press
or press again the key corresponding to the selected arming mode.
5. In the selected partition, the arming procedure will begin.
When the quick arming is available, the steps 3 and 4 are skipped.
6.3.3 Quick arming
The installer may permit arming without entering the code.
1. Indicate the partition(s) to be armed (press one of the keys: - partition 1; -
partition 2; or - both partitions).
2. Select the arming mode (press one of the keys: - full arming; - day arming;
- night arming).
3. In the partition(s), the arming procedure will begin.
6.3.4 Arming without delay
If there is nobody in the partition or nobody is leaving the partition which is to be set to the
day / night armed mode, you can arm the partition without exit delay (there will be no beeps
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel PERFECTA 16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel PERFECTA 16 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,47 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel PERFECTA 16

Satel PERFECTA 16 Snelstart handleiding - Nederlands - 11 pagina's

Satel PERFECTA 16 Gebruiksaanwijzing - Nederlands - 32 pagina's

Satel PERFECTA 16 Aanvulling / aanpassing - Nederlands - 52 pagina's

Satel PERFECTA 16 Aanvulling / aanpassing - Nederlands - 50 pagina's

Satel PERFECTA 16 Installatiehandleiding - Nederlands - 28 pagina's

Satel PERFECTA 16 Gebruiksaanwijzing - Deutsch - 32 pagina's

Satel PERFECTA 16 Aanvulling / aanpassing - Deutsch - 52 pagina's

Satel PERFECTA 16 Aanvulling / aanpassing - Deutsch - 50 pagina's

Satel PERFECTA 16 Installatiehandleiding - Deutsch - 28 pagina's

Satel PERFECTA 16 Snelstart handleiding - English - 10 pagina's

Satel PERFECTA 16 Aanvulling / aanpassing - English - 49 pagina's

Satel PERFECTA 16 Aanvulling / aanpassing - English - 50 pagina's

Satel PERFECTA 16 Installatiehandleiding - English - 27 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info