699548
30
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
28 MICRA SATEL
information on the module status will be sent – as test transmissions – to the selected
telephone numbers (see: “Send SMS with module status to CLIP” option).
Write event for reporting – if this option is enabled, each test transmission will be written to
the event log. After enabling the option, you can send test transmissions to the monitoring
stations. The method of sending the event code (SMS, GPRS) depends on the rules
defined for each monitoring station in the “GSM telephone, Monitoring stations” tab. It is
necessary to define the event code to be sent.
Event codes for module test transmission
The table makes it possible to define the Contact ID codes which will be sent to the
monitoring stations for the module test transmission (the code will also be written to the
event log).
Format – the field displays information that the code is sent in the Contact ID format.
CODE – program 3 digits of the event code in this field. You can also make use of the
code editor. To open the code editor window, click on the button available in the
“EVENT” field.
R – select this field, if the event code is to denote new restore/arming (click on the field
twice to select/deselect it).
Part. – enter in this field the partition number which will be included in the event message
sent to the monitoring station.
Z. No. – enter in this field the zone number which will be included in the event message
sent to the monitoring station.
EVENT – the field displays description of the event whose code is entered in the “CODE”
field. A button , which opens the editor of Contact ID codes, is also available in the
“EVENT” field.
The test transmission will be sent as an event, if the following parameters and options
are programmed for the monitoring station:
GPRS reporting (see section “Starting GPRS reporting”) or SMS reporting (see
section “Starting SMS reporting”) is activated,
object identifier different from “0000” is programmed,
reporting format is programmed,
event code different from “000” is programmed.
Test transmissions to be sent to telephone numbers
The table allows you to define the form in which the test transmissions will be sent to the
telephone numbers programmed in the “GSM telephone, Monitoring stations” tab. Click
twice on the chosen field to select/deselect it (the field is selected if the “x” symbol is
displayed in it).
SMS – select this field, if the module test transmission is to be sent to the selected
telephone number in the form of SMS message.
CLIP – select this field, if the module test transmission for the selected telephone number
is to be realized with the use of CLIP service (the module will dial the programmed
number and then will be trying for 30 seconds to get through – the module telephone
number will be displayed in the telephone).
Do not answer any call from the module, if the CLIP test transmission is to be
effected without incurring any costs.
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel MICRA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel MICRA in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel MICRA

Satel MICRA Gebruiksaanwijzing - Nederlands - 52 pagina's

Satel MICRA Gebruiksaanwijzing - Deutsch - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info