699548
28
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
26 MICRA SATEL
GPRS protocol
TCP / IP – if this field is selected, the module will send event codes to the monitoring station
using the TCP protocol.
UDP – if this field is selected, the event codes will be sent to the monitoring station by the
module using the UDP protocol.
SATEL IP – if this field is selected, the module will send event codes to the monitoring station
using the SATEL IP format.
SIA IP – if this field is selected, the event codes will be sent to the monitoring station by the
module using the SIA-IP format (SIA DC-09 standard).
SIA IP station 1 / SIA IP station 2
If the events are to be sent in the SIA-IP format, you are required to program additional
parameters for each monitoring station:
SIA-IP account no. – a sequence of up to 16 hexadecimal characters (digits or letters from A
to F), used for identification of the device for the needs of reporting in SIA-IP format. If the
account number is not defined, characters entered in the “Object identifier” field will be
used for identification of the device.
Test transm. every – days, hour and minutes – an additional test transmission can be sent
at specified time intervals to check connectivity with the monitoring station. You can
program the number of days, hours, minutes and seconds between subsequent
transmissions. Up to 45 days, 12 hours and 15 minutes can be programmed. Entering
zeros alone will result in sending no additional transmission.
SMS format
The format of SMS messages for SMS reporting must be defined according to the monitoring
station requirements. The default SMS messages format programmed in the module
corresponds to the factory default settings of the STAM-2 monitoring station (program version
1.2.0 or later). If events are to be sent in the form of two characters, enter the partition
symbol only.
Telephone numbers for messaging and test transmissions
Telephone number – it is possible to program 4 telephone numbers to which the module will
be able to send SMS messages and test transmissions, and from which will be also
possible to control the output and armed mode using the CLIP service. The telephone
number must be preceded by the country dialing code.
SMS retransmission – select the field (the field is selected when the “x” symbol is displayed
in it), if the SMS messages received by the module and sent from the telephone numbers
which are not in the list (e.g. information received from the operator of GSM network in
which the module is operating) are to be forwarded to the given telephone number.
CLIP-NO1 / NO2 – you can define in the field, whether and how the CLIP service effected
from the selected telephone number (T1 – T4) is to control the output. There are the
following options to choose from:
0: NO – CLIP service does not control the output,
1: ON – CLIP service will activate the output,
2: OFF – CLIP service will deactivate the output,
3: ON for a time – CLIP service will activate the output for a defined time (define the
time in the “Output cut-off time” field, “Options, zones, outputs” tab).
CLIP-arm – you can determine in this field whether and how the CLIP service effected from
the selected telephone number (T1 – T4) is to control the armed mode. There are the
following options to choose from:
0: NO – CLIP service does not control the armed mode,
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel MICRA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel MICRA in de taal/talen: Engels als bijlage per email.

De handleiding is 0,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel MICRA

Satel MICRA Gebruiksaanwijzing - Nederlands - 52 pagina's

Satel MICRA Gebruiksaanwijzing - Deutsch - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info