699072
92
Verklein
Vergroot
Pagina terug
1/102
Pagina verder
90 Programming SATEL
event assignment (if STATION 1 AND 2 is selected),
advanced options if SIA reporting format is selected.
4. If a reporting format other than CONTACT ID (FULL) or SIA (FULL) is selected:
assign identifiers to the partitions, zones, keypads and expansion modules,
program the codes for events which are to be reported.
5. Define the parameters of test transmissions.
6. Define the priority of GPRS reporting in the settings of INT-GSM module (INT-GSM
module connected to the control panel) or ETHM-1 Plus module (INT-GSM module
connected to the ETHM-1 Plus module).
Reporting by using the GSM module
As an external modem, the following module must be connected to the control panel
(the RS-232 ports of control panel and module must be connected):
GSM-X,
GSM LT-2 with firmware 2.11 (or later),
GSM-4 with firmware 4.11 (or later),
GSM-5.
If the GSM module is only connected to the control panel dialer terminals (TIP and
RING), the GPRS reporting settings will be ignored.
The EXTERNAL MODEM and MODEM ISDN/GSM/ETHM options must be enabled in the
control panel (see: Telephone optionsp. 68).
1. Enable the REPORTING GPRS option.
2. Determine whether the event codes will be sent to both monitoring stations or to one of
them only (STATION 1 OR 2 / STATION 1 / STATION 2 / STATION 1 AND 2).
3. Program the following for the monitoring station to which event codes are to be sent:
reporting format in which the codes will be sent,
server address,
port number,
IP format in which the codes will be sent (SATEL or SIA-IP),
encryption key (STATION KEY) and control panel identifier for the purposes of GPRS
reporting (GPRS KEY) if the SATEL format is selected,
additional parameters if the SIA-IP format is selected,
identifiers with which the events will be sent,
event assignment (if STATION 1 AND 2 is selected),
advanced options if SIA reporting format is selected.
4. If a reporting format other than CONTACT ID (FULL) or SIA (FULL) is selected:
assign identifiers to the partitions, zones, keypads and expansion modules,
program the codes for events which are to be reported.
5. Define the parameters of test transmissions.
10.2.4 SMS reporting
The TELIM format events cannot be sent as SMS messages.
1. Enable the REPORTING ETHM/INT-GSM option.
2. Determine whether the event codes will be sent to both monitoring stations or to one of
them only (STATION 1 OR 2 / STATION 1 / STATION 2 / STATION 1 AND 2).
92

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 128 Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 128 Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel Integra 128 Plus

Satel Integra 128 Plus Gebruiksaanwijzing - Nederlands - 53 pagina's

Satel Integra 128 Plus Aanvulling / aanpassing - Nederlands - 108 pagina's

Satel Integra 128 Plus Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 128 Plus Gebruiksaanwijzing - Deutsch - 55 pagina's

Satel Integra 128 Plus Aanvulling / aanpassing - Deutsch - 108 pagina's

Satel Integra 128 Plus Installatiehandleiding - Deutsch - 36 pagina's

Satel Integra 128 Plus Gebruiksaanwijzing - English - 51 pagina's

Satel Integra 128 Plus Installatiehandleiding - English - 35 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info