699072
90
Verklein
Vergroot
Pagina terug
1/102
Pagina verder
88 Programming SATEL
10.1.5 Event codes
For the pulse and Ademco Express formats, it is necessary to program codes which will be
reported to the monitoring station if the defined events occur. The reported events are those
for which a code different from 00has been programmed. 2 hexadecimal characters (digits
or letters from A to F) are to be programmed.
In case of the CONTACT ID (SELECTED) and SIA (SELECTED) formats, indicate the events
which are to be reported, entering for them any code different from 00 (a code
consistent with the format specification will be sent, not the entered one). The events
for which the 00 code has been programmed will not be reported.
10.1.6 Test transmissions
The test transmission may be sent:
at a specified time. The test transmission code will be sent regularly at a defined time. The
number of days between transmissions and the time of sending transmission are
programmed.
in specified time intervals. For each monitoring station, the number of days, hours and
minutes between transmission can be individually programmed. The test transmission
code will be sent:
after a predefined period of time has elapsed since the last transmission, irrespective of
whether it was a test transmission, or the code of another event was sent (the NO SYNC.
TO LAST TRANSMISSION
option disabled),
at predefined time intervals (the NO SYNC. TO LAST TRANSMISSION option enabled).
10.2 Starting the reporting
10.2.1 Telephone reporting
1. Enable the REPORTING TELEPHONE option.
2. Using the telephone options (see: Telephone options p. 68):
determine how the telephone numbers should be dialed (TONE DIALING option and in
case of the pulse dialing – PULSE DIALING 1/1,5 (OFF:1/2) option),
determine whether the control panel, prior to dialing the number, should check the
telephone line for dialing signal (NO DIAL TONE TEST option).
3. Determine whether the event codes will be sent to both monitoring stations or to one of
them only (STATION 1 OR 2 / STATION 1 / STATION 2 / STATION 1 AND 2).
4. Program the following for the monitoring station to which event codes are to be sent:
telephone number,
reporting format in which the codes will be sent,
the number of attempts to connect to the station after which, if there is no connection,
the control panel will suspend reporting (REPETITIONS),
time for which reporting will be suspended after the programmed number of attempts to
establish connection with the station has been made (SUSPEND TIME),
identifiers with which the events will be sent,
events assignment (if STATION 1 AND 2 is selected),
advanced options (if Ademco Express, Contact ID, SIA or TELIM format is selected).
5. If a reporting format other than CONTACT ID (FULL) or SIA (FULL) is selected:
assign identifiers to the partitions, zones, keypads and expansion modules,
program the codes for events which are to be reported.
6. Define the parameters of test transmissions.
90

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel Integra 128 Plus bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel Integra 128 Plus in de taal/talen: Engels als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel Integra 128 Plus

Satel Integra 128 Plus Gebruiksaanwijzing - Nederlands - 53 pagina's

Satel Integra 128 Plus Aanvulling / aanpassing - Nederlands - 108 pagina's

Satel Integra 128 Plus Installatiehandleiding - Nederlands - 35 pagina's

Satel Integra 128 Plus Gebruiksaanwijzing - Deutsch - 55 pagina's

Satel Integra 128 Plus Aanvulling / aanpassing - Deutsch - 108 pagina's

Satel Integra 128 Plus Installatiehandleiding - Deutsch - 36 pagina's

Satel Integra 128 Plus Gebruiksaanwijzing - English - 51 pagina's

Satel Integra 128 Plus Installatiehandleiding - English - 35 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info