699578
14
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
12 Programming CA-6
Functions programming zone parameters
FS24 - programming zone sensitivity
Each zone of the CA-6 can have an individual reaction time. Violations lasting shorter than
the programmed reaction time are disregarded by the control panel. Programming the
zones sensitivity in keypad is performed in a different way, than programming the other
parameters. The programming includes values from 1 to 255 which corresponds to the
times from 16 ms to 4080 ms according to the formula:
REACTION TIME = PROGRAMMED VALUE x
16 ms
By default, all the zones have the same reaction time (480 ms). In most cases, no change
of the time setting is required.
The function is intended for advanced installers. It allows the zone sensitivity to be
selected when special detectors are used (for example, mechanical glass break detectors,
or low hysteresis detectors, not fitted with monovibrator at the output).
Note: The minimum keypad zones sensitivity is 64ms (4 x 16 ms). The actual
sensitivity values of these zones can amount to n x 64ms (n=1,2,3,...). This
results from the way the keypad is operated by the control panel – the
zones status is read out at 64ms intervals.
During programming, the AB, AB LEDs indicate which zone the parameter refers to. The
zone number is displayed in binary format (for zone no. 1 – the lower B LED is blinking, for
zone no. 2 – the lower A LED, for zone no. 3 – both of them, etc.).
After setting a value for the given zone, press the [#] key to proceed to programming the
reaction time of the next zone. After the last parameter is entered and confirmed, the
control panel exits the function. The introduced changes will only be displayed after the
function is reentered.
The programming can be interrupted by using the [
*
] key.
EXAMPLE:
changing the reaction time of zones 1, 3 and 6 to 800 ms, zone 8 to 100 ms, the other
zones unchanged
800 ms/16 ms = 50 (enter this value for zones 1,3 and 6)
100 ms /16 ms = 6.25 (enter 6 for zone 8, it will ensure the reaction time = 96 ms)
[12345] [#] - enter the service mode
[2][4] [#] - call the function
[5][0] [#] - reaction time for the first zone (AB, AB LEDs = 0001)
[#] - confirm the second zone time (AB, AB LEDs = 0010)
[5][0] [#] - reaction time for the third zone (AB, AB LEDs = 0011)
[#] - confirm the fourth zone time (AB, AB LEDs = 0100)
[#] - confirm the fifth zone time (AB, AB LEDs = 0101)
[5][0] [#] - reaction time for the sixth zone (AB, AB LEDs = 0110)
[#] - confirm the seventh zone time (AB, AB LEDs = 0111)
[6] [#] - reaction time for the eighth zone (AB, AB LEDs = 1000)
the control panel automatically exits the function
Note: The parameter is entered in decimal and indicated in binary format.
A new value can be checked only after reentering function. It is displayed in binary format
on LEDs from 1 to 8.
The LEDs which are off mean 0. The value of the LEDs which are on corresponds with the
table below:
LED number 1 2 3 4 5 6 7 8
Bit weight 128 64 32 16 8 4 2 1
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-6 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-6 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel CA-6

Satel CA-6 Aanvulling / aanpassing - Deutsch - 19 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 19 pagina's

Satel CA-6 Installatiehandleiding - Deutsch - 80 pagina's

Satel CA-6 Gebruiksaanwijzing - Deutsch - 18 pagina's

Satel CA-6 Snelstart handleiding - English - 8 pagina's

Satel CA-6 Installatiehandleiding - English - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info