699577
20
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
18 Programming SATEL
FS10 - zones assignment to partition 3 (BIT)
FS11 - zones assignment to partition 4 (BIT)
The functions FS8 - FS11 are used to divide the alarm system into partitions. Description of
the control panel division into partitions - see the Installer Manual.
In the LED keypads, the zones are assigned to a partition in two stages. In the first stage
(LED 12 blinking), the zones from 1 to 8 are programmed, in the second stage (LED 11
blinking), the zones from 9 to 16 are programmed (LED 1 indicates then zone 9, LED 2 -
zone 10, etc.). You can proceed to the second stage by pressing the key [#]. Assignment of
the zones to a partition is effected by pressing the keys from 1 to 8 and indicated by lighting
of the LED representing the particular zone. Having programmed all the zones, press the key
[#] to save the entered data and quit the function.
In the LCD keypads, the zones can be assigned to partitions by entering the corresponding
zone number (zones 1-9 by pressing the numeric key, zones 10-16 by pressing, in turn, the
key [
*
] and the numeric key from 0 to 6, zones 10-16 being displayed by means of letters A
to G), or using the arrow keys (arrows and enable movement of the cursor, arrow
assigns a zone to or deletes a zone from partition, while arrow displays the name of zone
selected by the cursor). Pressing the key [#] will result in saving the entered data and quitting
the function.
FS12 - programming zones displayed in partition 1 keypad (BIT)
FS13 - programming zones displayed in partition 2 keypad (BIT)
FS14 - programming zones displayed in partition 3 keypad (BIT)
FS15 - programming zones displayed in partition 4 keypad (BIT)
Provision is made in the control panel for optional selection of the zones to be displayed in
the given keypad. This option refers mainly to the LED keypads i.e. to the CA-10-KLED and
the CA-10-KLED-S, which was produced until February 2006 (they display the status of 12
out of 16 zones). In the newest CA-10-KLED-S keypads (version 2.2 and latest) this function
has no meaning since the state of all zones from 1 to 16 is displayed. In the LCD keypads,
the functioning of this option is limited to the mode of LED standard display. The zones
which are to be shown in the keypad are displayed in the ascending order, while the zones
which are not to be shown are skipped. For example, if the zones 2, 3, 5 and 7 are selected
for display in the keypad, the status of zone 2 is displayed on the first LED, zone 3 status –
on the second, zone 5 – on the third, zone 7 – on the fourth, while the other LEDs will remain
unused.
The programming is similar to that in FS8 – FS11 (zones assignment to partition).
FS16 - programming auto-bypassed zones in partition 1 (BIT)
FS17 - programming auto-bypassed zones in partition 2 (BIT)
FS18 - programming auto-bypassed zones in partition 3 (BIT)
FS19 - programming auto-bypassed zones in partition 4 (BIT)
The functions 16 to 19 apply to the zones which are automatically bypassed after silent or
loud arming with the authority level 7 code (partial arming). The programming is similar to
that in FS8 – FS11.
Note: The zones to be bypassed at no exit from the partition are programmed with the
service functions FS 127
÷
130 (EXIT-BYPASS).
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-10 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Satel CA-10

Satel CA-10 Gebruiksaanwijzing - Nederlands - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 4 pagina's

Satel CA-10 Aanvulling / aanpassing - Deutsch - 64 pagina's

Satel CA-10 Aanvulling / aanpassing - Deutsch - 24 pagina's

Satel CA-10 Gebruiksaanwijzing - Deutsch - 26 pagina's

Satel CA-10 Installatiehandleiding - Deutsch - 44 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 2 pagina's

Satel CA-10 Aanvulling / aanpassing - English - 24 pagina's

Satel CA-10 Gebruiksaanwijzing - English - 24 pagina's

Satel CA-10 Snelstart handleiding - English - 11 pagina's

Satel CA-10 Installatiehandleiding - English - 43 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info