215777
66
Verklein
Vergroot
Pagina terug
1/77
Pagina verder
66
Appendix
Image is out of focus.
Adjust focus of the projector (see page 24).
Provide proper distance between the projector and the projection screen
(see page 14).
Check the projection window to see if it needs cleaning (see page 62).
Moving the projector from a cool to warm place may result in moisture
condensation on the projection lens. If this occurs, leave the projector off
and wait until condensation evaporates.
Projecting from excessive slant angle to the screen may cause keystone
distortion and partial imperfect focus.
Picture is not bright enough.
Check if “Contrast” or “Brightness” are adjusted properly. (See page 34,
42)
Check if “Image level” is selected properly. (See pages 32-33, 40-41)
Check the Lamp control function. ( See “SETTING” section on page 51)
Check the Lamp replace indicator. If it lights, the end of lamp life is
approaching. Replace the lamp with a new one promptly. (See page 63)
The color is strange.
Check the Input signal, color system, video system, or computer system
mode.
Adjust the Image Level properly. See pages 32-33, 40-41.
Image is Left/Right reversed.
Image is Top/Bottom reversed
Check the Ceiling/Rear function (see page 49).
Check the Ceiling function (see page 49).
The image is distorted or runs off.
Check “PC Adjustment” menu or “Screen” menu and adjust them.
No sound
Check the audio cable connection from audio input source.
Adjust the audio source.
Press the Volume + button (see page 25).
Press the Mute button (see page 25).
Is the image projected? You will hear the sound only when the
image is projected.
When the AUDIO OUT is plugged in, the projector’s built-in speaker is not
available.
Auto PC adjustment function does
not work.
Check the Input signal. Auto PC Adjustment function can not work when
480p, 575p, 720p, 480i, 575i, 1035i, or 1080i is selected. (See page 29)
Some displays are not seen during
the operation.
Check the Display function (see page 46).
The setting does not remain after
turning off power.
Make sure you selected “Store after adjusting settings. Some settings
can not be stored if not registered with “Store.
Power management function does
not work.
Power management function can not work while “Freezeor “No Show”
function is running.
Image disappears automatically.
Check the power management function in the Setting. The power
management is set to "On" at the factory.
Capture function does not work.
Check the connection and input signal to see if there is signal.
66

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sanyo plc xl51 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sanyo plc xl51 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info