215777
65
Verklein
Vergroot
Pagina terug
1/77
Pagina verder
65
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
Make sure you have properly connected the projector to peripheral equipment as described on pages 16-18.
Make sure all equipment is connected to the AC outlet and the power is turned on.
When you operate the projector with a computer and it does not project an image, restart the computer.
Appendix
Problem:
Solutions
No power
Plug the power cord of the projector into the AC outlet.
See if the POWER indicator lights red.
Wait until the POWER indicator stops blinking to turn on the projector
again. The projector can be turned on after the POWER indicator turns red.
(see page 21).
Check the WARNING indicator. If the WARNING indicator lights red, the
projector cannot be turned on (see on page 60).
Check the projection lamp (see page 63).
Check if the projector is installed in proper position. (See page 7)
Unlock the Key lock function for the projector. See page 51.
PIN code dialog box appears at
start-up.
PIN code lock is being set. Enter a PIN code; the “1234” or numbers you
have set (see pages 20, 52-53)
The initial display is not shown.
Make sure “Off or “Countdown Offare not chosen at Display function.
(See “SETTING” section on page 46)
The initial display is not same with
the default one.
Make sure “User” or Offare not chosen at Logo select function. (See
“SETTING” section on page 47)
Input signal switches automatically.
(or does not switch automatically)
Make sure Input search function is adjusted properly. See page 49.
When the projector is on and you
press the input button, an icon other
than the Lamp mode icon appears.
That is the Filter warning icon. Refer to page 55.
An icon other than Input mode or
Lamp mode icon appears.
That is the Lamp replacement icon or the Filter warning icon. See page
54.
No image
Check the connection between your computer or video equipment and the
projector (see pages 16-18).
See if the input signal is correctly output from your computer. Some laptop
computers may need to be changed the setting for monitor output when
connected to the projector. See your computers instruction manual for the
setting.
It takes about 30 seconds to display an image after turning on the
projector.
See if the selected system is corresponding with your computer or video
equipment (see pages 28, 39).
Select correct input source once again through menu operation (see pages
27, 37–38).
Make sure the temperature is not out of the specified operating
temperature (41 ˚F–104 ˚F [5 ˚C–40 ˚C]).
When "No Show" is operating, the image can not be displayed. Press the
NO SHOW button or any other button on the remote control.
65

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sanyo plc xl51 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sanyo plc xl51 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info