797034
13
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
12
GB
F
E
NL
D
The SW meter band indicator (Q) will now be blinking
on the display.
4. Press one of the numeric buttons (19), the Memo
button (24), the Freq button (25) or the Cancel button
(31) to select the corresponding meter band.
The following table shows which buttons (mentioned
in step 4 above) correspond to which meter band and
frequency range:
USER INPUT METER BAND FREQUENCY
RANGE (MHz)
1 120m 2.300-2.495
2 90m 3.200-3.400
3 75m 3.900-4.000
Freq 60m 4.750-5.060
4 49m 5.900-6.200
5 41m 7.100-7.350
6 31m 9.400-9.990
Memo 25m 11.600-12.100
7 21m 13.500-13.870
8 19m 15.100-15.800
9 16m 17.480-17.900
15m 18.900-19.020
0 13m 21.450-21.750
Cancel 11m 25.600-26.100
NOTE
After selecting a meter band, the selected band will
remain on the display as long as the radio is tuned
within this meter band. When using scan tuning,
the automatic scan will also loop within the selected
meter band, unless you continue pressing one of
the Tuning Up / Down buttons (18) till the frequency
crosses the range of the meter band.
SINGLE SIDE BAND (SSB) RECEPTION
– SW / MW / LW
SSB is very popular among ham and business radio users
because of its efficiency. Amateurs who use SSB and
transmit below 10MHz generally use the lower side band
(LSB), while amateur and commercial stations transmitting
above 10MHz generally use the upper side band (USB).
Your ATS-909X2 is capable of receiving all USB and LSB
transmissions.
To receive SSB stations:
1. Turn on the radio using the Power button (10).
2. Rotate the AM RF Gain jog dial (40) to the maximum
position.
3. Select the SW, MW, or LW band by pressing the
corresponding button.
4. Tune to an SSB station in accordance with earlier
instructions.
5. As soon as you have tuned to an SSB station (you will
not be able to clearly hear any speech), switch to SSB
reception by pressing the SSB button (6) repeatedly to
switch between AM, USB and LSB. The SSB indicator
(G) on the display shows which band is currently
selected.
6. After selecting the correct mode, use the STEP button
(17) to select SLOW stepping and then use the Rotary
Tuning knob (16) to fine-tune to the station.
NOTE
The minimum tuning step is set to 20Hz by default, but it
can be changed to 10Hz in the menu. Refer to the next
section for more information on setting the SSB tuning
step.
SETTING THE SINGLE SIDE BAND
TUNING STEP – SW / MW / LW
When using manual tuning on either of the single side
bands, the frequency change per tuning step when using
the Rotary Tuning knob (16) can be adjusted by following
these steps:
1. Press and hold the Menu button (29) to open the menu.
2. Use the Rotary Tuning knob (16) to select "SSB STEP"
in the Text display (U).
3. Press the Step button (17) or Enter button (30) to start
configuring the setting.
The current setting will now blink in the Text display (U).
4. Use the Rotary Tuning knob (16) to select 10Hz or
20Hz.
5. Press the Step button (17) or Enter button (30) to
confirm your choice.
6. Press the Menu button (29) to close the menu.
The following table shows the available tuning steps for
the Rotary Tuning knob (16) and the Tuning Up / Down
buttons (18) for the single side bands:
LSB / USB
LW MW SW
Rotary
Tuning
knob
STOP 0 0 0
FAST 1kHz 1kHz 1kHz
SLOW 20Hz /
10Hz
20Hz /
10Hz
20Hz /
10Hz
Tuning Up / Down 9kHz 9kHz /
10kHz 5kHz
SETTING THE BANDWIDTH
The Bandwidth Control switch (13) allows you to choose
whether the bandwidth for the various bands should be
automatically set or manually set. When the switch is
placed in the manual position, the Bandwidth Control
button (26) can be used to change the bandwidth on the
SW, MW, LW, FM and AIR bands.
A wide bandwidth can increase sound quality when
receiving a strong signal, while a narrow bandwidth can
make it easier to receive weak signals and overcome
problems caused by interference. When selecting the
narrowest bandwidth on the FM band, stereo playback is
not always available.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sangean ATS-909X2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sangean ATS-909X2 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Sangean ATS-909X2

Sangean ATS-909X2 Gebruiksaanwijzing - Nederlands - 21 pagina's

Sangean ATS-909X2 Gebruiksaanwijzing - Deutsch - 20 pagina's

Sangean ATS-909X2 Gebruiksaanwijzing - Français - 21 pagina's

Sangean ATS-909X2 Gebruiksaanwijzing - Espanõl - 21 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info