449840
62
Verklein
Vergroot
Pagina terug
1/258
Pagina verder
62
English
Other Information
Issues Solutions and Explanations
A scheduled recording has failed. A scheduled recording is disabled for certain operations (formatting, performance test, error checking,
deleting) that access the file system of a USB device.
If there is no USB device connected, the TV will not record even if the scheduled time is reached.
The TV will not record if the USB device has no free memory space. Check that this is not the case.
If you record a channel locked with Parental lock, the PIN input window will appear when you try to
play back the recording.
Several recording devices are connected
but the TV stopped recording.
If multiple recording devices are connected and the device set as Default Recording Device has no
free memory space, the recording function will be closed. Attempt recording again. The device with
the most free memory space will automatically be set as Default Recording Device and the TV will
start recording.
Others
The picture won’t display in full screen. HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3)
contents.
Black bars on the top and bottom will appear during movies that have aspect ratios different from
your TV.
Adjust the picture size options on your external device or TV to full screen.
The remote control does not work. Replace the remote control batteries with the poles (+/–) in the right direction.
Clean the sensor’s transmission window on the remote.
Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
doesn’t turn the TV on or off, or adjust the
volume.
Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user
manual for the SAMSUNG TV code.
A “Mode Not Supported” message
appears.
Check the supported resolution of the TV, and adjust the external device’s output resolution
accordingly. Refer to the resolution settings on page 29 of this manual.
There is a plastic smell from the TV. This smell is normal and will dissipate over time.
The TV Signal Information is unavailable
in the Self Diagnostic Test menu.
This function is only available with digital channels from an Antenna / RF/Coax connection. (p. 28)
The TV is tilted to the side. Remove the base stand from the TV and reassemble it.
There are difficulties assembling the stand
base.
Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you
cannot remove the screws from the TV.
The channel menu is greyed out.
(unavailable)
The Channel menu is only available when the TV source is selected.
Your settings are lost after 30 minutes or
every time the TV is turned off.
If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure.
Press the SOURCE button to select TV mode, and go to MENU Setup Plug & Play (Initial
setup) ENTER
(p. 7).
You have intermittent loss of audio or
video.
Check the cable connections and reconnect them.
Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90
degree connectors.
You see small particles when you look
closely at the edge of the frame of the TV.
This is part of the product’s design and is not a defect.
The PIP menu is not available. PIP functionality is only available when you are using a HDMI, PC or components source (p. 27).
The message “Scramble signal” or “Weak
Signal/No Signal” appears.
If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.
If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.
You turned the TV off 45 minutes ago, and
it turned on again.
It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware
downloaded whilst your watching TV.
There are recurrent picture/sound issues. Check and change the signal/source.
A reaction may occur between the rubber
cushion pads on the base stand and the
top finish of some furniture.
To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,
there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
[UC8790]BN68-02849D-01L04.indb 62 2010-04-01 오후 7:57:45
62

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Samsung-UE-46C8700

Zoeken resetten

  • Ls,

    Al enige tijd heb ik een Samsung 46c8700. Voorheen heb ik de verlichting van het Samsung logo uitgezet via het menu /Plug & Play/ Algemeen/Lichteffect/uit.
    Door omstandigheden is mijn antenne kabel er een keer uit geweest. Nadien heb ik weer een verlicht logo. Als ik het uitzet via de stap zoals hierboven beschreven dan gaat het logo uit. Zet ik echter de televisie uit en daarna weer aan dan staat het lichteffect weer op "kijkstand aan".
    Mijn vraag is dan ook hoe zet ik het verlichte logo definitief uit. Gesteld op 1-11-2013 om 16:15

    Reageer op deze vraag Misbruik melden
    • Eindelijk zelf de oplossing gevonden. Het probleem lag in het feit dat de televisie terug was gevallen naar "winkeldemo". Hoe dit terug te zetten naar standaard is te vinden in het volgende filmpje www.youtube.com/watch?v=_pxX33Utta8?
      Geantwoord op 12-11-2013 om 19:06

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samsung UE 46C8700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samsung UE 46C8700 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 38,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Samsung UE 46C8700

Samsung UE 46C8700 Gebruiksaanwijzing - Nederlands - 67 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info