449840
61
Verklein
Vergroot
Pagina terug
1/258
Pagina verder
61
English
05 Other Information
Issues Solutions and Explanations
No Picture, No Video
The TV won’t turn on. Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
Make sure the wall outlet is working.
Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns
on, refer to “The remote control does not work” below.
The TV turns off automatically. Ensure the Sleep Timer is set to Off in the Setup menu. (p. 25)
If your PC is connected to the TV, check your PC power settings.
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if
there is no signal.
There is no picture/Video. Check cable connections (remove and reconnect all cables connected to the TV and external
devices).
Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the
connections to the TV input. For example, if an external device’s output is HDMI, it should be
connected to an HDMI input on the TV.
Make sure your connected devices are powered on.
Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
RF(Cable/Antenna) Connection
The TV is not receiving all channels. Make sure the Antenna cable is connected securely.
Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU -
Setup - Plug & Play (Initial setup) and wait for all available channels to be stored (p. 7).
Verify the Antenna is positioned correctly.
The picture is distorted: macro block error
small block, dots, pixelization
Compression of video contents may cause picture distortion, especially with fast moving pictures
such as sports and action movies.
A low signal can cause picture distortion. This is not a TV issue.
PC Connection
A “Mode Not Supported” message
appears.
Set your PC’s output resolution and frequency so they match the resolutions supported by the TV
(p. 29).
“PC” is always shown on the source list,
even if a PC is not connected.
This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.
The video is OK but there is no audio. If you are using a HDMI connection, check the audio output setting on your PC.
Network Connection (Depending on Models)
Wireless network connection failed. Samsung Wireless USB dongle is required to use a wireless network.
Make sure the Network Connection is set to Wireless (p. 32).
Make sure the TV is be connected to a wireless IP sharer (router).
Recording / Timeshift
The USB device is not recognized or a
Device Format, Device Test or Device
Performance Test fails.
See the manual for the USB device to check that the USB device supports recording.
If the USB device has a lock, ensure it is off.
Check that the USB device can be formatted when connected to the PC. Connect the USB to the TV
and format it. (Formatting may fail intermittently.)
If a Device Performance Test or formatting failed, it means that there is a problem with the USB
hardware or the performance of the USB hardware is too low.
A message prompts me to format a USB
device that has been working well.
If the USB device has a lock, ensure it is off.
Recover the USB device using the recovery function in Checking Device.
The recording function does not work. Check that a USB device is connected.
Check that the channel is a recordable digital channel.
If the signal is weak or does not exist, the recording function will automatically be closed.
The TV will not record if the USB device has no free memory space. Check that this is not the case.
Timeshift Mode does not work. Check that a USB device is connected.
Radio channels and analogue broadcasts are not supported.
Data broadcast channels are not supported.
If the signal is weak or does not exist, the Timeshift Mode function will automatically be closed.
Timeshift Mode cannot be performed if the USB device has no free memory space. Check that this
is not the case.
A message indicates a performance test
failure, and the recording and
Timeshift Mode functions do not work.
These problems may occur if you use a low-capacity USB device that does not support recording.
We recommend using the USB HDD.
[UC8790]BN68-02849D-01L04.indb 61 2010-04-01 오후 7:57:45
61

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Samsung-UE-46C8700

Zoeken resetten

  • Ls,

    Al enige tijd heb ik een Samsung 46c8700. Voorheen heb ik de verlichting van het Samsung logo uitgezet via het menu /Plug & Play/ Algemeen/Lichteffect/uit.
    Door omstandigheden is mijn antenne kabel er een keer uit geweest. Nadien heb ik weer een verlicht logo. Als ik het uitzet via de stap zoals hierboven beschreven dan gaat het logo uit. Zet ik echter de televisie uit en daarna weer aan dan staat het lichteffect weer op "kijkstand aan".
    Mijn vraag is dan ook hoe zet ik het verlichte logo definitief uit. Gesteld op 1-11-2013 om 16:15

    Reageer op deze vraag Misbruik melden
    • Eindelijk zelf de oplossing gevonden. Het probleem lag in het feit dat de televisie terug was gevallen naar "winkeldemo". Hoe dit terug te zetten naar standaard is te vinden in het volgende filmpje www.youtube.com/watch?v=_pxX33Utta8?
      Geantwoord op 12-11-2013 om 19:06

      Waardeer dit antwoord Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samsung UE 46C8700 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samsung UE 46C8700 in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 38,83 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Samsung UE 46C8700

Samsung UE 46C8700 Gebruiksaanwijzing - Nederlands - 67 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info