19
Your microwave oven can be programmed to cook food in up to
four stages.
Example
: You wish to defrost food and cook it without having
to reset the oven after each stage. You can thus
defrost and cook a 1.8 kg chicken in four stages:
◆ Defrosting
◆ Standing for 1 minute
◆ Grill for 15 minutes
◆ Combined convection and microwave cooking
at 200°C for 30 minutes
➢ The first two stages must be defrosting and a standing time.
The combination, convection, and grill modes can only be
used once each in the remaining two stages; microwaves
can however be used twice at two different power levels.
The convection tray should be used, when grill,
convection, and combination cooking are required.
1 Press the Auto Defrost ( ) button and set the weight by turning the dial
knob the appropriate number of times (1.8 kg in the example).
2 Press Hold/Delay( ) and set the standing time by turning the dial knob
the appropriate number of times (1 minute in the example).
3 Press GRILL and set the cooking time by turning the dial knob the
appropriate number of times (15 minutes in the example).
4 Set the convection temperature by pressing the MW+OVEN button the
appropriate number of times (200°C in the example).
5 Set the microwave power level by the pressing POWER LEVEL the
appropriate number of times (70% in the example)
6 Set the combined mode cooking time by turning the dial knob (30 minutes
in the example).
7 Press Start ( 1min+) button.
Result: Cooking starts and when it has finished:
◆ When the cooking time is over, the oven will be oven
beeping and flashing “:0” four times. And the oven will
beeps every one minute.
◆ If the door is open, or the Stop ( ) button is pressed,
current time will be displayed.
The Hold Time can be used to set a standing time automatically
(without microwave cooking). You do not need to watch the clock;
the oven will beep when the standing time is over.
1 Press the Hold/Delay ( ) button.
Result
: The follwing indication are displayed :
H (Hold/Delay mode)
2 Select the standing time by turning dial knob.
3 Press Start ( 1min+) button.
Result
: The oven beeps when the standing time is over.
Multistage Cooking
Setting a Standing Time
GB
