629782
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Introduction
Thank you for purchasing the Expedition XP510i PORTABLE PA SYSTEM from Samson! The XP510i features a com-
pact, 10-channel mixer with 500 watts of onboard power and dual 2-way speakers, making it an ideal solution for
a variety of small to medium sized PA applications. The XP510i is extremely portable thanks to its lightweight and
unique “Slide and Lock design.
The 10-channel mixer can be removed from the speaker for tabletop use. It features 4 inputs for connecting micro-
phones, plus three inputs for connecting stereo signals, like those from a CD player or electronic keyboard. There’s
also a built-in, 24-bit digital eects processor to add studio quality eects to your voice or instruments. For music
playback, the XP510i features a convenient iPod dock. The mixer also provides a robust output, with 500 watts of
total power from the lightweight, Class D amplier section. The XP510i employs a matched speaker system with
dual 2-way enclosures that have proprietary 10-inch woofers and 1-inch high frequency drivers. To help project
the sound to a larger audience, the XP510i speakers can be mounted on standard speaker stands, thanks to the
integral pole mount receptacles. The XP510i is constructed using durable ABS, high impact plastic, making it super
road tough, and at the same time, lightweight.
In this manual, you’ll nd a detailed description of the features of the XP510i PA system, as well as a description of
its front and rear panels, step-by-step instructions for its setup and use, and full specications. You’ll also nd a war-
ranty card enclosed—please don’t forget to ll it out and mail it in so that you can receive online technical support,
and so we can send you updated information about these and other Samson products in the future. Also, be sure
to check out our website (www.samsontech.com) for complete information about our full product line.
With proper care and adequate air circulation, your XP510i will operate trouble free for many years. We recommend
you record your serial number in the space provided below for future reference.
Serial number:_______________________________
Date of purchase:____________________________
Should your unit ever require servicing, a Return Authorization number (RA) must be obtained before shipping
your unit to Samson. Without this number, the unit will not be accepted. Please call Samson at 1-800-3SAMSON
(1-800-372-6766) for a Return Authorization number prior to shipping your unit. Please retain the original packing
materials and if possible, return the unit in the original carton and packing materials. If you purchased your Sam-
son product outside the United States, please contact your local distributor for warranty information and service.
Features
The XP510i is a compact PA system with dual 2-way speakers, onboard mixer and 500 watt power amplier.
The XP510i is the ultimate in portable design. The lightweight and clever design allow you to connect all the
pieces together into a single, easy to move case.
The mixer is stored in one of the speaker cabinets; the other cabinet has an accessory compartment for storing
the speaker cables, microphones, etc.
The speakers are 2-way vented enclosures with 10-inch woofers for deep bass, complimented by a 1-inch high
frequency driver, set in a custom horn with a 60 x 90 degree coverage pattern producing a clean, clear sound.
The internal 2 x 250 watt lightweight Class D power amplier produces a powerful stereo sound.
The XP510i’s mixer can be removed from the speaker for tabletop use and you can use the kick stand to set the
mixer at an ergonomically correct angle.
The 10-channel mixer features four Mic/Line inputs allowing you to connect microphones or line signals, plus
three stereo inputs for connecting line signals from keyboards, drum machines and MP3/CD players. You can
engage the Phantom Power switch if you are using condenser microphones.
• On each of the mixer’s channel inputs there is a Bass and Treble control allowing you to equalize the tone of the
individual inputs.
To create a lush sound on any of the microphone channels, you can select from the ten, onboard, 24-bit digital
eects.
The XP510i features a built-in iPod dock allowing you to easily connect most iPod models for seamless music
playback. You can use the iPod to simply play music, add background tracks, or repeat a commercial message at a
fair or trade show.
• For added exibility, the XP510i’s mixer has a Monitor Out on two, 1/4 inch jacks allowing you to connect to exter-
nal powered monitor speakers.
XP510i Quick Start
Unpacking and Setting Up the XP510i
• Unpack all the system components from the shipping carton and save all packing materials in the (unlikely) event
your unit ever needs to be returned for service.
• Remove the mixer by turning the quarter turn screw counterclockwise towards the RELEASE position.
LOCK
RELEASE
• Carefully hold the mixer to remove it from the speaker.
• Remove the accessory compartment cover by turning the quarter turn screw counterclockwise towards the
RELEASE position, and remove the included speaker cables.
• Replace the accessory panel by aligning the bottom of the panel into the slots, make sure the quarter turn screw
is in the RELEASE position; then close the panel and turn the quarter turn screw clockwise to LOCK.
• Position the speakers on the oor or on stands, and using one of the included speaker cables, connect the mixer’s
LEFT SPEAKER OUT to the left speakers input connector. Next, use the second included speaker cable to connect
the RIGHT SPEAKER OUT to the right speaker’s input connector.
Using a Microphone
• Be sure that the XP510i’s Power switch is set to the OFF position.
Turn all of the channel VOLUME (VOL) controls fully counterclockwise to the “0” position.
• If the speakers are not connected, connect the speaker wires as described in the previous section.
• Next, connect the power cable to an AC outlet.
• Using a standard XLR cable, plug a microphone into the XP510i’s Channel 1 MIC INPUT.
Using a Line Level Signal
• Be sure that the XP510i’s Power switch is set to the OFF position.
Turn all of the channel VOLUME (VOL) controls fully counterclockwise to the “0” position.
• Connect the power cable to an AC outlet.
• If using channels 1-4, set the MIC/LINE switch to the LINE position.
• Using standard 1⁄4-inch cables, connect a line level signal from a keyboard into the XP510i’s LINE INPUTS.
XP510i Quick Start cont’d
• Switch the XP510i’s Power switch to the ON position.
• Play your guitar or keyboard and slowly raise the channel control and the MASTER level control until you have
reached the desired VOLUME.
Electric Acoustic
Guitar
Conguring the XP510i for Transport
You can easily carry your sound system using the XP510i’s “Slide and Lock” feature. The “Slide and Lock” speaker
enclosures allow you to connect both speakers together into a single, easy to carry unit. Follow these steps to
congure the XP510i for easy transport.
2. Position the second speaker above the rst speaker
and line up the “Slide and Lock tracks and grooves so
that they are parallel to the speaker on the oor.
3. Slide the second speaker into the speaker on the
oor making certain that the two speakers stay parallel
to each other.
• Switch the XP510i’s Power switch to the ON position.
• Set the MIC/LINE switch to the MIC position.
• Set the Channel 1 VOLUME (VOL) control to about halfway.
While speaking into the microphone, slowly raise the MASTER level control until you have reached the desired
level.
4. You will feel a slight click when the two speakers are
in place.
Specications*
Maximum Output Power
250 W + 250 W @ 8 Ω
Maximum Output Level (0.5% T.H.D. @ 1kHz)
+22dBu(MONITOR L/R) @ 10 kΩ
+14 dBu (REC) @ 10 kΩ
T.H.D
<0.1% @+14 dB 20 Hz ~ 20 kHz (MONITOR L/R,REC L/R) @ 10 kΩ
Frequency Response
20 Hz ~ 20 kHz +/-1 dB, 10 kΩ (MONITOR L/R)
20 Hz ~ 20 kHz +0/-1 dB, 10 kΩ (REC L/R)
Hum and Noise (Input GAIN=Maximum Input sensitivity, MIC)
-112dBu equivalent input noise ( Rs = 150 Ω )
-90dBu Residual noise (MONITOR L/R) all Levels at Minimum
-80dBu MONITOR at nominal level and all channel Levels
minimum.
-70dBu MONITOR at maximum level and all channel Levels
minimum.
Maximum Voltage Gain
50dB MIC 1/2(XLR,LIMIT Position) IN TO MONITOR L/R
60dB MIC 3/4(XLR) IN TO MONITOR L/R
40dB MIC 1/2(PHONE TRS,LIMIT Position) IN TO MONITOR L/R
50dB MIC 3/4(PHONE TRS) IN TO MONITOR L/R
14dB CH 1/2 LINE(PHONE TRS,LIMIT Position,MIC/LINE SW IN) IN TO
MONITOR L/R
24dB CH 3/4 LINE(PHONE TRS,MIC/LINE SW IN) IN TO MONITOR L/R
28dB ST LINE IN TO MONITOR L/R
48dB MIC 3/4(XLR) IN TO REC L/R
Crosstalk (at 1 kHz)
-70 dB between input channels
-70 dB between input/output channels
SPEECH/MUSIC
167 Hz, 3dB/Octave
Input Channel Equalization
HIGH: 10 kHz shelving ±15 dB
LOW: 100 Hz shelving ±15 dB
LIMIT/COMP Switch
DOWN = Comp, UP = Limit (CH1/2)
Phantom Power
+15V DC
Power Source/Power Consumption
AC INPUT 100 V~240 V, 50/60 Hz, 600 W MAX.
Weight
52.8 Ib (24 Kg)
Dimensions
22.7’’(W) x 12.6’’(D) x 22’’(H)
577 mm(W) x 320 mm(D) x 560 mm(H)
Where 0 dBu = 0.775 V and 0 dBV = 1 V
Dimensions
320
603
173
339
13.1°
301
301
88
Input Connector Input Impedance Nominal Source
Impedance
Rated Input Level Connector Type
CH MIC 3.6 kΩ / 7.5 kΩ 50 ~ 600 Ω / 600 Ω -32 dBu / -22dBu XLR Type Balanced
/ Phone Jack (TRS)
T=Hot R=Cold
S=GND
CH LINE 3.6 kΩ / 7.5 kΩ 50 ~ 600 Ω / 600 Ω -6 dBu / +4 dBu XLR Type Balanced
/ Phone Jack (TRS)
T=Hot R=Cold
S=GND
STEREO INPUT 10 kΩ 600 Ω 0 dBu Unbalanced Phone
Jack
STEREO INPUT 10 kΩ 600 Ω 0 dBu RCA pin Jack
Output Connector Output Impedance Nominal Load
Impedance
Rated Output
Level
Connector type
MONITOR L/R 1 kΩ ≥10 kΩ +4 dBu Phone Jack (TRS)
Impedance bal-
anced T=hot R=Cold
S=ground
REC OUT 600 Ω ≥10 kΩ +4 dBu RCA pin Jack
SPEAKER OUTPUT 8 Ω 250 W Phone Jack
Input Specications
Output Specications
*Specications and design subject to change without notice
System Specications
Owners Manual
E PEDITION
XP510i
PORTABLE PA SYSTEM
1. Place one speaker on the oor and set it on its side.
XP510i Wiring Guide
There are several ways to interface the XP510i to support a variety of applications. The XP510i features balanced
inputs and outputs, so connecting balanced and unbalanced signals is possible.
CONNECTING THE XP510i
Unbalanced 1/4” Connector
Balanced TRS 1/4” Connector
XLR Balanced Wiring Guide
Speaker cabinets must be reversed with respect to top and
bottom.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samson XP510i Expedition bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samson XP510i Expedition in de taal/talen: Engels als bijlage per email.

De handleiding is 2,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Samson XP510i Expedition

Samson XP510i Expedition Gebruiksaanwijzing - Deutsch - 2 pagina's

Samson XP510i Expedition Gebruiksaanwijzing - Français - 2 pagina's

Samson XP510i Expedition Gebruiksaanwijzing - Italiano - 2 pagina's

Samson XP510i Expedition Gebruiksaanwijzing - Espanõl - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info