1 LEVEL (CH 1) – Used to control the
level of the CHANNEL 1 input.
2 LEVEL (CH 2) – Used to control the
level of the CHANNEL 2 input..
3 RF LED - Illuminates when an RF
signal is detected.
4 LEVEL (WIRELESS) – Used to
control the level of the wireless
microphone.
5 BASS - Controls the low band
of the Channel Equalizer, +/- 15 dB
at 100Hz.
6 POWER – Switches on the XP40iw’s
main power.
7 MIC/INST (connector) - Combo XLR
plus 1/4 inch Input for connecting
microphone or Instrument (line)
level signals.
8 AUX IN - 1/8-inch Auxiliary line
input for connecting a Laptop, CD or
MP3 player.
9 INSTRUMENT Input - 1/4-inch
phone jack connector used to
connect instrument or line level
signals.
10 iPod LEVEL Used to control the
level of the iPod input.
11 LINK - 1/4-inch phone jack
connector used to link a second
XP40i or XP40iw.
12 Treble - Controls the high band
of the Channel Equalizer, +/- 15 dB
at 10kHz.
13 PEAK LED - The Red LED illuminates
at the level where distortion occurs.
14 DC POWER INLET – Connect
the supplied standard DC power
adapter here.
15 BATTERY LED - Show the status of
the battery charge level.
