23501
11
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
7
Controls and Functions
MONO INPUT CHANNEL SECTION
The following section details each part of the MDR1248
and MDR1688’s MONO INPUT CHANNELS including the
GAIN control, LOW CUT switch, 3-BAND EQ, AUX sends,
PEAK LED, PAN, SOLO, ALT 3/4 bus and LEVEL controls.
The input channels one through four on the MDR1248
and on through eight on the MDR1688 feature high
quality, discrete transistor pre-amps providing transpar-
ency and extended dynamic range.
1 - GAIN - control knob
The MDR1248 and MDR1688’s pre-amp stage has a vari-
able GAIN control with a range of 0 to 40dB on the MIC
input and –15 to +25dB on the LINE input.
2 - LOW CUT FILTER - switch
Each of the MDR1248 and MDR1688’s mono input chan-
nels include a LOW CUT (or high pass) filter which rolls off
the low frequencies from 75Hz and below at the rate of
18dB per octave. The LOW CUT filter allows you to remove
the lower frequencies that you sometime just dont want
to pick up. For example, when you are miking a high-hat
you only want to capture the frequencies that the hi-hat is
producing. Therefore, by using the LOW CUT filter, you can
reduce the amount of pick-up from the low toms and bass
drum that may leak into the hi-hat mic. You can use the
same technique on other instruments like acoustic guitar,
violin, piano and even on vocals. In live sound applica-
tions, the LOW CUT filter is especially useful for removing
stage rumble.
3 - Channel Equalizer
The MDR1248 and MDR1688 mic/line input channels
incorporate a 3-band equalizer, with sweepable Mid-
range, allowing you to adjust the high, mid-range, and
low frequencies independently on each channel. The fre-
quency centers, range of boost or cut, and equalizer type
for each band are described in the following section.
HF (HIGH FREQUENCY) 12kHz +/- 15dB Shelving type
The channel’s HIGH frequency response is flat when the
knob is in the “12:00” position. Rotating the knob towards
the right will boost the channel's high frequency response
at 12 kHz by 15dB, and rotating it towards the left will cut
the high frequency by 15dB.
MF (MID FREQUENCY) CUT & BOOST
The MID CUT & BOOST knob is used in conjunction with
the MID FREQUENCY knob to create the tonal shape in
the mid-range frequency when using the mono channel’s
equalizers. You can adjust the frequency on the mid-range
control with the FREQ knob, and use the MF CUT & BOOST
to either boost or cut that frequency by plus or minus
15dB. The channel’s MID frequency response is flat when
the MF knob is in the “12:00” position.
FREQ (MID FREQUENCY) Variable 100Hz – 5K
The MID FREQUENCY is a control enabling you enhanced
capabilities in the tonal shaping of the input channel
signal. Thanks to the MID FREQUENCY control, you have
a variable mid-range equalizer, allowing you to pin point
the exact frequency you want to boost or cut. The MID
SWEEP has a “fixed Q” of two octaves (the amount, or
width, of frequencies around the center point that are
effected by the MID CUT & BOOST control) and can be set
in a range from 100Hz to 5Khz.
LF (LOW FREQUENCY) 80Hz +/- 15dB shelving type
The channel’s LOW frequency response is flat when the
knob is in the “12:00” position. Rotating the knob towards
the right will boost the channel's low frequency response
at 80 Hertz by 15dB, and rotating it towards the left will
cut the frequency by 15dB.




11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samson MDR1688 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samson MDR1688 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Samson MDR1688

Samson MDR1688 Gebruiksaanwijzing - Français - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info