24757
9
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
GAIN
The MDR16’s pre-amp stage has a variable GAIN control with a range of 5 to 60dB
on the MIC input and –26 to +26dB on the LINE input.
CLIP LED
The MDR16’s MIC/LINE pre-amp also includes a CLIP LED which, when illuminated,
indicates that the signal is peaking or overloading. To reduce distortion, lower the
GAIN, EQ, or fader control to keep this LED from staying on.
HF (HIGH FREQUENCY)
12kHz +/- 15dB shelving type. The channel’s frequency response is flat when the
knob is in the "12:00" position. Rotating the knob towards the right will boost the
corresponding frequency band by 15dB, and rotating it towards the left will cut
the frequency by 15dB.
MID (CUT & BOOST)
The MID CUT & BOOST knob is used in conjunction with the MID FREQUENCY
knob to create the tonal shape in the mid-range frequency when using the mono channel’s equalizers. You can
adjust the frequency on the mid-range control with the MID SWEEP knob, and use the MID CUT & BOOST to either
boost or cut that frequency by plus or minus 15dB.
MID FREQUENCY
The MID FREQUENCY is a control enabling you enhanced capabilities in the tonal shaping of the input channel sig-
nal. Thanks to the MID FREQUENCY control, you have a variable mid-range equalizer, allowing you to pin point the
exact frequency you want to boost or cut. The MID SWEEP has a “fixed Q” of two octaves (the amount, or width, of
frequencies around the center point that are effected by the MID CUT & BOOST control) and can be set in a range
from 100Hz to 5kHz.
LF (LOW FREQUENCY)
80Hz +/- 15dB shelving type The channel’s frequency response is flat when the knob is in the "12:00" position.
Rotating the knob towards the right will boost the corresponding frequency band by 15dB, and rotating it towards
the left will cut the frequency by 15dB.
LOW CUT FILTER
Each of the MDR16’s channels include a LOW CUT (or high pass) filter which rolls off the low frequencies from 80Hz
and below at the rate of 18dB per octave.






























7
Controls and Functions
MONO INPUT CHANNEL SECTION
The following section details each part of the MDR16ʼs MONO INPUT CHANNELS including the GAIN control, CLIP LED,
3-BAND EQ, AUX sends, PAN and LEVEL controls.
The input channels one through eight on the MDR16 feature high quality,
discrete transistor pre-amps providing transparency and extended dynamic range. The inputs feature a standard XLR mic connec-
tor for microphone level signals, and a standard 1/4" phone connector, either balanced (TRS – TIP/ RING/SLEEVE) or unbalanced (TS
TIP/SLEEVE) for line level signals.
1
2
4
5
6
3
7
CHANNEL EQUALIZER
The MDR16 input channels feature a 3-band, swept-mid equalizer allowing you to
adjust the high, mid, and low frequencies independently on each channel. The fre-
quency centers, range of boost or cut, and equalizer type for each band are as follows:
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samson MDR16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samson MDR16 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info