24757
8
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
Front and Rear Panel Layout
6
REAR PANEL
A
AC ADAPTER INLET
– Connect External AC power
AC ADAPTER INLET – Connect External AC power AC ADAPTER INLET
supply here.
B
POWER
– Switches on the MDR16’s main power.
C
PHANTOM
– Engages the 48-Volt Phantom
power supply to microphone pre-amps.








43 MONO OUT
The Left and Right main Mix outputs are
summed together to a monaural signal and sent out this
connector.
44 EQ IN/OUT
When pressed in, the Amber LED will illu-
minate indicating that the Graphic Equalizer is active.
45 AUX RETURN 2
This control knob is used to adjust
the level of the signal connected to the AUX RETURN 2
inputs.
46
EQ TO AUX -
When pressed in, the onboard Graphic
Equalizer is switched from the main mix to the AUX 1
output.
47
SOLO (AUX RETURN 2
) -
Back-lit LED switch used to
assign the AUX RETURN 2 bus to the SOLO bus.
48 +48 PHANTOM POWER LED
– Indicates that the 48 Volt
Phantom Power is on.
49 POWER LED
– Indicates the MDR16 is powered up.
50 SOLO LED
– Indicates SOLO is selected.
51 PFL LED
– Indicates the SOLO is in PFL (Pre-Fader Level)
mode.
52 OUTPUT METER
Twelve-segment display with VU bal-
listics indicates main Mix level.
53
DSP AUX 1 -
This control knob is used to adjust the level
of the internal DSP effect in the AUX 1 outputs
DSP ON –
This push switch is used to engage the
onboard DSP effects.
55 DSP PRE-SET SELECT
– Used to switch between the 8
pre-sets of the internal DSP effects processor.
56 SOLO Switch (3/4 Bus)
– Back-lit LED switch used to
assign the 3/4 Bus to the SOLO bus.
57 SOLO/PFL Switch
– Used to change the operating mode
of the SOLO bus from SOLO to PFL (Pre Fader Listen).
58 3/4 TO MIX Switch
When engaged, the LED lights and
the input channels which are assigned to 3/4 will be
mixed together with the Main Left and Right Outputs.
59 MIX MUTE Switch
When the switch pressed, the red
LED lights indicating the Main Left and Right outputs are
fully attenuated.
60 SOLO DEFEAT Switch
This global control, back-lit
switch is used to disconnect all channels from the SOLO
bus.
61 MIX L R FADER
- Used to control the overall volume of
the Left and Right main Mix outputs.
62 HEADPHONE JACK
– Connect stereo headphones here.
62 HEADPHONE JACK – Connect stereo headphones here. 62 HEADPHONE JACK
63 C ROOM + HEADPHONE
– Adjusts the volume of the
control room speakers or headphones.
64 SOLO LEVEL
– A rotary control knob used to set the
overall volume of the SOLO bus.
65 MIX/2TK
– Switches between the main Mix and the 2
Track in the Control Room output.
66 OUTPUT 4 FADER
– Used to control the overall volume
of the bus 4 mix output.
67 OUTPUT 3 FADER
– Used to control the overall volume
of the bus 3 mix output.
68 OUTPUT 2 FADER
– Used to control the overall volume
of the bus 2 mix output.
69 OUTPUT 1 FADER
– Used to control the overall volume
of the bus 1 mix output.
70 1/2 TO MIX
When engaged, the LED lights and the
input channels which are assigned to 1/2 will be mixed
together with the Main Left and Right Outputs.
71 SOLO (1/2 Bus)
– Back-lit LED switch used to assign the
1/2 Bus to the SOLO bus.
DSP 3/4 –
This control knob is used to adjust the
level of the internal DSP effect in the Bus 3/4 out-
puts
73 SOLO (AUX RETURN 1)
– Back-lit LED switch used to
assign the AUX RETURN 1 to the SOLO bus.
DSP 1/2 -
This control knob is used to adjust the
level of the internal DSP effect in the Bus 1/2 out-
puts
75 DSP PEAK LED
– LED light illuminates when the signal
sent to the internal DSP is clipped.
76 AUX RETURN 1 Knob
– Used to mix in level of the
external effects connected to the Aux RETURN 1 inputs.
77
3/4 ASSIGN
– LED, back-lit switch used to assign the
channel to the 3/4 output bus.
1/2 ASSIGN
(Stereo Channels)
– LED, back-lit switch
used to assign the channel to the1/2 output bus.
79
SOLO Switch (Stereo Channels)
– Back-lit LED switch
used to assign the channel to the SOLO bus.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Samson MDR16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Samson MDR16 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info