Menu control
To be able to change the basic settings of your TV, the
easytip Z1 has an integrated menu control.
Check in the manufacturers operating manual, if your TV
supports this function.
Step 1 Press the (M) key quickly. This opens the menu on
your TV.
Step 2 If the menu control works with your stored code,
the LED will illuminate continuously.
If, after pressing the (M) key, the LED flashes
quickly, then the stored code does not work with
the TV menu. However, it is possible to control the
brightness and colour with your remote. Please
refer to ”Controlling the colour and brightness”.
If, after pressing the (M) key, the LED does not
flash, then the stored code does work with either
the TV menu or the colour / brightness functions.
Step 3 Now you can control the menu by using the
(Volume +), (Volume -), (Programme +) and
(Programme -) keys.
Step 4 To save any changes in the menu press the
(OK/Norm) key.
Step 5 To quit the menu press the (M) key.
If you are sure that your TV supports these functions but
your remote does not control them, maybe the wrong
code was programmed. If so try the other codes in the
code list or run the code search mode.
GB User Manual
D Bedienungsanleitung
I Istruzioni per l’usoF Mode d’emploiNL Gebruiksaanwijzing
User Manual
Helpline 00800 31133113
11
