Step 3 To determine the stored code press the following
keys:
up for the first digit
left for the second digit
(OK/Norm) for the third digit
right for the fourth digit
After pressing one of these keys, count the number
of flashes emitted by the LED. As long as you do
not exceed 5 seconds between each process you
can press any of these keys as often as you want.
So you do not have to hurry or panic if you miss a
flash.
Make sure that you count the flash that occurs
including the initial flash when depressing the key.
Example:
After pressing the (Programme +) key the LED flashes
once. So the first digit of your code is 1.
After pressing the (Volume -) key the LED flashes
thrice. So the second digit of your code is 3.
After pressing the (OK/Norm) key the LED flashes
five times. So the third digit of your code is 5.
After pressing the (Volume +) key the LED flashes
thrice. So the fourth digit of your code is 3.
In this example the code is 1353.
Please make a note of the codes in the box below
for eventual reprogramming.
Please write down your 4-digit code here:
CODE
GB User Manual
D Bedienungsanleitung
I Istruzioni per l’usoF Mode d’emploiNL Gebruiksaanwijzing
User Manual
Helpline 00800 31133113
9
