647744
71
Verklein
Vergroot
Pagina terug
1/216
Pagina verder
71
Chapter 3. Creating Your Own Sounds
Chapter 3
The display will graphically indicate the selected Structure.
The symbols displayed have the following meanings.
W1 (WG1), W2 (WG2), F1 (TVF1), F2 (TVF2), A1 (TVA1), A2
(TVA2), B (booster), R (ring modulator)
* If you select a Tone while in the Structure display, the Tone that
is paired with the selected Tone will also be selected.
* If a Structure 2–10 is selected, turning off one Tone will cause
the other Tone to be connected in the simple order of WG/TVF/
TVA.
Booster (Booster Gain)
If the Type parameter has been set to 3 or 4, you can adjust
how strongly the Booster will function. The Booster amplifies
the incoming signal, causing it to distort. This creates an
effect similar to the distortion often used on an electric
guitar.
Setting Effects for a Patch
(EFFECTS)
This group contains settings for the Multi-Effects/Chorus/
Reverb effects used by a Patch.
* If an “x” mark is displayed at the right of the display name, the
effect for that display has been turned off. Turn the
corresponding effect on before you make settings (p. 62).
OUTPUT
These parameters specify how the output of each Tone will
be sent to the effects.
* When the Type parameter (PATCH/COMMON/STRUCT) has
a setting of 2–10, the outputs of Tones 1 (3) and 2 (4) will be
combined with Tone 2 (4). This means that the setting for Tone
1 (3) will be ignored.
Output Assign (Output Assign/Output Level)
Select whether or not the output of each Tone will be sent
through Multi-Effects, and adjust the volume of each Tone.
MIX: Output the Tone to the OUTPUT jack without passing
through Multi-Effects.
EFX: Output the Tone to the OUTPUT jack through Multi-
Effects.
* If you select MIX, the settings in the PATCH EFX OUT
display (PATCH/EFFECTS) will be ignored.
Chorus (Chorus Send Level)
Adjust the amount of Chorus for each Tone.
Reverb (Reverb Send Level)
Adjust the amount of Reverb for each Tone.
PATCH EFX TYPE
Specify the Patch Multi-Effects.
Type (EFX Type)
Select the type of Multi-Effects. For details refer to Multi-
Effects Types (EFX Parameter) (p. 93).
PATCH EFX PRM (Patch EFX Parameters)
Set the various parameters of the selected EFX type. For
details refer to Multi-Effects Types (EFX Parameter) (p.
93).
Ring Modulator
The Ring Modulator multiplies two Tones together,
creating a new sound that includes overtones
(inharmonic overtones) that were not present in either
of the two original Tones. Since the pitch difference
between the two Tones will change the overtone
structure, the result will be an unpitched metallic
sound. This is especially suitable for creating bells and
other metallic sounds.
fig.3-26
71

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland XP-30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland XP-30 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info