647744
51
Verklein
Vergroot
Pagina terug
1/216
Pagina verder
51
Chapter 2. Playing
Chapter 2
Changing Sound Characters
1. Make sure that the PATCH PLAY display is showing.
2. Press [FILTER/ENV] and its indicator lights.
3. Move the sliders while you play to vary the sound.
To modify the brightness, move the CUTOFF slider.
To change resonance, move the RESO. slider.
To change attack time, move the ATTACK slider.
To change decay time, move the DECAY slider.
Changing the Volume of Each Tone
1. Make sure that the PATCH PLAY display is showing.
2. Press [LEVEL] and its indicator lights.
3. Move the LEVEL slider as you play the keyboard to
adjust volume as desired.
Sliders 1, 2, 3, and 4 are used to change the volume of Tones
1, 2, 3, and 4, respectively.
Playing in Performance Mode
There are two types of performances: Layer performances
and Single performances. The upper right of the display
will indicate LAYER p* (* is the part number) for a layer
performance, and part=* (* is the part number) for a single
performance.
Layer Performance allows playing two or more Parts
simultaneously on the keyboard. Select Layer Performance if
you want fat, rich sounds of two or more Patches, or play
different Patches in a split keyboards different sections.
Single Performance plays only the Part shown in the display
(current Part). Select Single Performance for playing a song
using two or more instruments.
* Make your Performance type selection with the Key Mode
parameter (PERFORM/COMMON/PERFORM COMMON).
The Key Mode parameter determines how the XP-30 keyboard
will play the internal sound source. It has no effect on how the
XP-30 sound source is played from the built-in sequencer or an
external MIDI device.
* You can toggle between SINGLE and LAYER directly from the
PERFORM PLAY display by pressing [SOLO] while holding
down [SHIFT].
Selecting a Performance
The XP-30 offers three groups of Performances (User, Presets
A and B) with each group having 32 Performances. A total of
96 Performances is available.
USER
The XP-30 user memory includes 32 Performances that can
be rewritten to produce your own Performances.
PR-AB (Preset AB)
The XP-30 contains 64 preset Performances that cannot be
rewritten. But you can call up preset Performance settings
into the temporary area, modify them, and then store them in
user memory.
1. Press [PERFORM] to call up the 52
PERFORM PLAY display.
fig.2-07.e
2. Rotate the VALUE dial or press [INC]/[DEC] to select a
Performance.
Selecting a Performance Using
Numeric Keys
You can choose a Performance with direct numeric key
input.
1. Press [PERFORM] to call up the PERFORM PLAY
display.
2. Use the following buttons to select the Performance
group.
Button Performance Group
[SHIFT] + [1] PR-A (Preset A)
[SHIFT] + [2] PR-B (Preset B)
[SHIFT] + [6] USER (User)
3. Use numeric keys to input the Performance number.
The performance number and name will blink. At this time
the Performance has not yet been finalized.
4. Press [ENTER] to finalize the entry.
* Using Digit Hold, a Performance can be selected simply by
specifying the 1’s place number (p. 48).
51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland XP-30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland XP-30 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info