647744
50
Verklein
Vergroot
Pagina terug
1/216
Pagina verder
50
Chapter 2. Playing
8. Rotate the VALUE dial or press [INC]/[DEC] to make
the setting. For details on the available categories, refer to
page 49.
* This setting is linked with the Category parameter (PATCH/
COMMON/PATCH CATEGORY).
Making a Patch Sound Thick or
Thin (Turning a Tone On/Off)
Since a Patch is a combination of up to four Tones, you can
switch unwanted (Tones out of the four) off and get just the
sound of a specific Tone.
* This setting is linked with the Switch parameter (PATCH/
WAVE/WAVE). If you want just one or two Tones to sound in
a Patch, turn the others off and store that setting on a Patch.
This cuts nonessential use of the XP-30’s simultaneous voices.
1. Make sure that the PATCH PLAY display is showing.
2. Make sure that [EDIT] indicator is dark. If it is lit, press
[EDIT].
At this time, the on/off setting of each Tone in the displayed
Patch will be shown by the indicators of TONE SWITCH [1]
[4]. Those that are lit are on, and those that are dark are off.
3. Use TONE SWITCH [1][4] to switch Tones on/off.
Playing Single Notes (Solo)
Normally, the XP-30 allows you to play chords. Pressing
[SOLO] allows performance using single notes. This function
is effective when performing a solo using single-note Patches
like sax and flute.
1. Make sure that the PATCH PLAY display is showing.
2. Press [SOLO] so its indicator lights.
Now you can play a solo.
* This setting is linked with the Assign parameter (PATCH/
CONTROL/KEY MODE & BENDER). When the [SOLO]
indicator is turned on, the Assign parameter will be set to
SOLO. When the indicator is dark, it will be set to POLY.
3. Play the XP-30 keyboard.
* If you press [SOLO] when Single Performance is selected, the
Solo function can be switched on or off for the current Part.
When Layer Performance is selected, the Solo function can be
switched on or off for the Parts with the Local parameter
(PERFORM/MIDI/MIDI) set ON. If a Rhythm Set is selected,
[SOLO] cannot be turned on.
Creating Smooth Pitch Changes
(Portamento)
Portamento ensures a smooth pitch changeover from one
note to the next note played. When [SOLO] is on (indicator
lights), you can simulate techniques like violin glissandos.
1. Make sure that the PATCH PLAY display is showing.
2. Press [PORTAMENTO]. Its indicator lights.
Youre ready to play portamento.
* This setting is linked with the Sw parameter (PATCH/
CONTROL/PORTAMENTO).
3. To change the portamento settings, press [EDIT] to make
the indicator light. Then press the [CONTROL] function
button, and press [ ] or [ ] to access the
PORTAMENTO display.
fig.2-06
4. Move the cursor over to Time, Mode, Type or Start
parameter.
See p. 73 for each parameters functions.
5. Rotate the VALUE dial or press [INC]/[DEC] to get the
value you want.
6. Press [EXIT] to return to the PATCH PLAY display and
play.
* If you press [PORTAMENTO] when Single Performance is
selected, the Portamento function can be switched on or off for
the current Part. When Layer Performance is selected, the
Portamento function can be switched on or off for the Parts with
the Local parameter (PERFORM/MIDI/MIDI) set ON. If a
Rhythm Set is selected, [PORTAMENTO] cannot be turned on.
Using the Sliders to Modify the
Sound in Realtime
(Sound Palette Function)
With the four sliders in the PALETTE section, you can create
sound variations or volume changes in real time.
* Sound variations or volume changes made with the Sound
Palette affect only the performance. They have no effect on
current Patch settings. Change the Patch and these Sound
Palette settings will be lost.
* The sound character and volume changes created using the
Sound Palette will also be transmitted to the external MIDI
devices.
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland XP-30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland XP-30 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info