708951
78
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
Menu options
78
r
Backing Keyboard BK-5
Write User
This function allows you to save the settings you
made on the “Compressor” page.
1.
Press the [WRITE] button.
2.
Rotate the [CURSOR÷VALUE] dial to select
“YES”, then press the [ENTER/SELECT] but-
ton to save the current settings.
The display shows a confirmation message.
If you don’t want to define the current settings as
the default state, rotate the [CURSOR÷VALUE] dial to
select “NO”, then press the [ENTER/SELECT] button.
The BK-5 then returns to the “Compressor” page.
NOTE
There is only one “User” memory for your own settings. By
saving new settings, you therefore overwrite the previous
ones.
NOTE
When you switch on the BK-5, it automatically loads the
“User” settings.
Equalizer
To edit the Equalizer parameters, use [MENU] button ‰
“Mastering Tools” ‰ “Equalizer”.
The equalizer has the same function as the TREBLE, MID
and BASS knobs on a mixer: it allows you to color the
sound, or to apply tonal corrections.
1.
Select a keyboard part, an SMF song or a
rhythm and start playback.
2.
Set the “Switch” parameter to “On” to acti-
vate the equalizer.
The equalizer is now active and will affect the key-
board parts and SMF song or rhythm playback.
(Select “Off” to switch the equalizer back off.)
3.
Use the [CURSOR÷VALUE] dial to select the
“Preset” parameter, then press the [ENTER/
SELECT] button.
4.
Rotate the [CURSOR÷VALUE] dial to select
one of the available presets.
The available presets are:
Threshold –36~0dB This parameter allows you to
set the level the frequency
band (“High”, “Mid” or
“Low”) must reach to trigger
its compressor. The lower
the value, the more notice-
able the compression will be.
Ratio 1:1.0~
1:INF
Use this parameter to spec-
ify how strongly the level
should be reduced when the
band’s level exceeds the
“Threshold” level. “1:2.0”, for
example, means that level
values above the “Threshold”
level are halved. “1:INF” is
useful if you set “Threshold”
to “0dB” or thereabout. This
produces a limiter effect,
which means that no signal
level will ever exceed the
“Threshold” value. This may
help you protect the speak-
ers of the PA system etc.
Level –24~
+24dB
This parameter allows you to
establish the desired mix
among the three compressor
bands. Choose a negative
value to decrease the level,
or a positive one to increase
it. Choose “0” for a band
whose level is OK as is.
Split High 2000~
12000Hz
These two parameters spec-
ify the frequency where two
bands are separated. The
compressor has three bands,
and so there are two cross-
over frequencies you can
set: “High” between the
“Mid” and “High” ranges;
and “Low” between the
“Mid” and “Low” ranges.
Split Low 80~800Hz
Parameter Setting Explanation
1. Flat
2. Rock
3. Pop
4. Jazz
5. Classic
6. Standard
7. User
BK-5_US.book Page 78 Thursday, May 23, 2013 7:01 PM
78

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland BK-5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland BK-5 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Roland BK-5

Roland BK-5 Gebruiksaanwijzing - Deutsch - 147 pagina's

Roland BK-5 Aanvulling / aanpassing - English - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info