708951
77
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
Mastering Tools
Backing Keyboard BK-5
r
77
Mastering Tools
The BK-5 contains an effects processor that applies to
all real-time, rhythm and SMF song parts.
This processor is called “Mastering Tools”, because it
allows you to perfect the signal mix to adapt it to the
sound system you are using.
The parameters discussed here can be selected using
[MENU] button ‰ “Mastering Tools”.
Compressor
This multi-band compressor/limiter allows you to pro-
cess three frequency ranges separately. A compressor
reduces high levels (peaks) and boosts low levels,
smoothing out fluctuations in volume.
To edit the Compressor parameters, use [MENU] button
‰ “Mastering Tools” ‰ “Compressor”.
1.
Select a keyboard part, an SMF song or a
rhythm and start playback.
2.
Set the “Switch” parameter to “On” to acti-
vate the compressor.
The compressor is now active. (Select “Off” to switch
the compressor back off.)
3.
Use the [CURSOR÷VALUE] dial to select the
“Preset” parameter, then press the [ENTER/
SELECT] button.
4.
Rotate the [CURSOR÷VALUE] dial to select
one of the available presets.
The available presets are:
5.
If none of the preset memories contains the
settings you need, press the [ENTER/SELECT]
button to select and set the following
parameters:
1. Hard Comp
2. Soft Comp
3. Low Boost
4. Mid Boost
5. High Boost
6. Standard
7. User
Parameter Setting Explanation
Level 0~127 Use this parameter to set
the compressor’s input level.
The higher the value, the
stronger the three frequency
bands are compressed.
The value you set here is
added to the “Level” settings
of the three bands. Do not
set this parameter to “0” if
the compressor is switched
on, because doing so means
that the keyboard parts, the
SMF song or Rhythm parts
are no longer audible.
Gain –12~0~
12dB
Use this parameter to cor-
rect the level at the com-
pressor’s outputs. If the
settings of the remaining
parameters lead to a signifi-
cantly lower level, select a
positive value. If your set-
tings lead to a significantly
higher level, select a nega-
tive value. “0” means that
the level is neither boosted
nor attenuated.
High/Mid/Low: Because “Attack”, “Release”, “Threshold”,
“Ratio” and “Level” are the same for each band, we will
only discuss them once. As you see, each of the three fre-
quency ranges has its own set of parameters that allow
you to specify their behavior.
Attack 0~100ms Use this parameter to spec-
ify how fast the compressor
of the band in question
should start processing the
signal once the level of that
band exceeds the “Thresh-
old” level. Choose a smaller
value if you prefer a com-
pression similar to that of
FM radio stations. Higher
values may yield a “snap-
pier” or “funkier” sound.
Release 50~
5000ms
This parameter allows you to
specify how fast the com-
pressor of the corresponding
band should stop working
when the signal level drops
below the “Threshold” value.
BK-5_US.book Page 77 Thursday, May 23, 2013 7:01 PM
77

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Roland BK-5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Roland BK-5 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Roland BK-5

Roland BK-5 Gebruiksaanwijzing - Deutsch - 147 pagina's

Roland BK-5 Aanvulling / aanpassing - English - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info