512484
78
Verklein
Vergroot
Pagina terug
1/268
Pagina verder
EN
24
Completing the Wire Fastening
Once complete, walk back along the perimeter and add in wire pegs to those areas of the wire
where it is not pulled down below the level of the grass tips and close to ground level. Wherever
the wire is raised or loose, it should be tightened and pegged down with extra wire pegs (distance
between pegs should be 0.5 to 1 meter (1.5-3 ft) in straight line and more when curved).
1.7 Setup in None-Base Zone
Note: Setup in a non-Base zone, which is not connected to the Base Station, requires a Perimeter
Switch (available as an accessory - see Chapter 7 - Accessories).
1.7.1 Perimeter Switch Location
Find a convenient spot outside the perimeter of the non-Base zone, but a location that is
relatively easy for you to access.
The Perimeter Switch must be mounted vertically in order to maintain its’ water resistance and
preferably in a dry and sheltered location.
Close to a wall socket (230V/120V) – the Perimeter Switch is supplied with an indoor power
supply (Figure 1.35).
1.7.2 Placing the Perimeter Switch
The Perimeter Switch connector is designed for quick and easy disconnection that allows you to
easily move the perimeter switch between plots.
The Perimeter Switch also comes with a large stake that fastens to its back, making transfer from
one plot to another easier by allowing you to disconnect the switch and move it with the stake still
attached (Figure 1.36).
Another option is to mount the Perimeter Switch onto a vertical surface, such as a wall or deck
railing. There are three small bosses on the back of the switch cover in order to mount it this way.
(Figure 1.37).
Figure 1.36
Perimeter Switch
with stake
attached
Squeeze the tabs
on both sides to
remove cover
Mounting the Perimeter Switch using
three mounting bosses on back cover
Figure 1.37
Figure 1.35
Perimeter Switch
Location
The Perimeter Switch MUST be
mounted vertically in order
to maintain its’ water resistance
Indoor Power
Supply
2 meters
low voltage
cable
Wires leading from the perimeter to the
Perimeter Switch are adjacent and touching.
78

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Robomow-Tuscania-500

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robomow Tuscania 500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robomow Tuscania 500 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 9,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info