520094
59
Verklein
Vergroot
Pagina terug
1/105
Pagina verder
Model menu Transmitter
control travel / Dual Rates
FX-40
In this display you can select any of the following curve types:
Linear: linear curve
EXP1: exponential curve (curve 1)
EXP2: exponential curve (curve 2)
VTR: curve for 3-D aerobatics
LINE: straight 9-point (2- … 17-point) curve
Curve: 9-point curve (2- … 17-point) curve with turn points
Mark your pr
efer-
r
ed curve type to
activate it, and it
is displayed in
graphic form. This
example shows
part of a screen
shot displaying a
linear curve.
The settings can be defined separately for the right side (RATE
A) and for the left side (RATE B) of the curve: mark the appro-
priate field and use the arrow buttons to alter the value in it.
The adjustment range is -200% to +200%; the default setting
is +100%. Pressing the ‘Reset’ field restores the default set-
ting.
The curve can be shifted both vertically (OFFSET) and also to
left or right (X-OFFSET). This is achieved by marking the cor-
responding field and entering an offset value using the arrow
buttons. Positive values move the curve up or to the right;
negative values down or to the left. Each change in the curve
is immediately displayed on-screen in graphic form, so you
can always see the net effect of the curve programming you
carry out.
The same procedure is employed for setting up the two availa-
ble exponential
curves. The illus-
trations show
typical examples
of these curve
types. The EXP
function affects
the characteris-
tics of the sticks:
the linear connec-
tion between the
transmitter con-
trol travel and the
servo travel is
altered to an
exponential cha-
racteristic, which
generally provi-
des finer control
of the model.
As an additional feature, the fields ‘Rate A and B’ can be mar-
ked to adjust the transmitter control travel separately for each
side of centre.
If you select a
VTR curve, addi-
tional set-up
levels become
available. The
values are entered
individually for the
right and left sides
(RATE A and B),
and the curve can be shifted vertically using ‘OFFSET’. The
VTR curve points also have to be set as ‘P.POS’ and as
‘P.RATE’ for each side (A and B). In this case the adjustment
range is +0% to +100%; the default is +50%. Pressing the
‘Reset’ field re-activates the default setting.
For both freely
selectable curve
types ‘Line’ and
‘Curve’ you have
to define curve
points. The two
screen-shots
show parts of the
display as typical
examples of these
curves. The hori-
zontal double
arrow buttons
allow you to scroll
backwards from
one point and for-
wards to the next.
The buttons with a single arrow are used to generate new
points, starting from an existing point. The active point (the
one you can change) is always marked in colour.
To carry out a change to any of these points, mark the field
which contains the appropriate curve point. Use the arrow but-
tons to select the point which is to be changed. Once the des-
ired point has been activated, the percentage value is dis-
played in the ‘Rate’ field.
Nine different points are available by default, but for special
applications the number of points can be varied between two
and seventeen.
This is the procedure for erasing a point: mark the display field
(Rate), select the point to be erased using the horizontal dou-
ble arrow buttons, and mark the ‘Erase’ field. The point is initi-
ally displayed as a square, and this disappears completely
when you select the adjacent point.
It is also possible to shift these two curve types vertically using
‘Offset’; the method is exactly as described previously.
For more information on these procedures please refer to the
description of setting up control curves and mixer curves,
which you will find on page 27 in Part 1 of these instructions.
58
59

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robbe Futaba FX-40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robbe Futaba FX-40 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robbe Futaba FX-40

Robbe Futaba FX-40 Gebruiksaanwijzing - Deutsch - 105 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info