Handleiding Robbe Futaba FX-40 (pagina 58 van 105) (Engels)

520094

Verklein

Vergroot

Pagina terug

1/105

Pagina verder

Model menu Transmitter

control travel / Dual Rates

FX-40

17.2 TRANSMITTER CONTROL TRAVEL / DUAL RATE

CURVE

The purpose of the AFR function is to adjust the basic settings

of the transmitter contr

ols and switches (channels 1 to 12, and

V1 to V4), individually for each flight mode. However

, before

you change any transmitter control settings, it is important to

define the maximum servo travels using the ‘Servo travel set-

tings (ATV)’ function (see Section 16.11, Part 1). If you have

activated a mixer, you can use this function to alter the set-

tings for both channels simultaneously.

For each flight mode up to six switchable transmitter control

settings are available (D/R button), and they can be assigned

freely to any control function. Up to six different types are avai-

lable, from linear via exponential to curves, with two to a maxi-

mum of seventeen points.

All parameters can be adjusted at this point, including separa-

tely variable servo transit speed adjustment and delay for the

‘there’ and ‘back’ directions of travel. Another option is to set

group mode (effective in all flight modes) or individual mode

(effective only in a specific flight mode).

Mark the ‘Transmitter control (AFR-D/R)’ option in the Model

menu. The screen display now looks something like this:

All the settings can be changed in this display. Please use the

following procedure:

• Entering pre-set values

First mark the set-up field for the ‘Control function’ (top

right). The display now changes to show the select menu

for the individual channels.

In this display you can select the channel whose settings

you would like to change. In the scr

een shot above, this is

the Ailer

on function.

At this point you can also define whether the settings to be

entered apply to all flight modes (Glob) or only to one speci-

fic mode (Sepa). The default setting for all functions is ‘glo-

bal’ mode. To re-program this point, mark the correspon-

ding field and confirm the security query with ‘Yes’.

The purpose of the ‘Speed’ frame is to adjust the servo

transit speed. If you wish, you can enter a separate speed

for both directions (‘there’ and ‘back’). The adjustment

range is 0 to 27 increments.

Please note: the higher the number, the more slowly the

servo moves. The maximum value (27 increments) corres-

ponds to a duration of nine seconds. The default setting is

always ‘0’. When you mark one of the fields ‘there’ or

‘back’, the button fields for the arrows appear at the right

margin. It is possible to make adjustments in steps of one

increment (single arrow) or ten increments (double arrow).

Pressing the ‘Reset’ button restores the default setting.

Any one of six different curves can be selected for each

transmitter control. Simply mark the field bearing the name

of the curve shape you wish to use.

• Setting up switchable transmitter control travels (D/R)

Any one of six switchable transmitter control travels (‘D/R’)

can be set for each flight mode; the softwar

e of

fers six dif-

ferent curve types - Linear via Expo to Curve - for this

option. Mark the ‘D/R’ field: the display changes, and you

can enter your preferred settings in the sub-menu which

then appears.

The first step here is to activate the D/R settings you wish to

use by marking the first field in the appropriate line. The

function is then activated, and the screen display changes

from inactive (INA) to OFF.

Move to the ‘Function’ field and select the channel for

which the D/R setting is to apply. The default setting for all

six Dual Rate settings is the ‘Aileron’ function. To change

the function, simply mark the corresponding field and ans-

wer ‘Yes’ to the security query. The current transmitter con-

trol is then displayed in graphic form.

You now have to select an actuating switch. Mark the

appropriate field in the last column, then select your prefer-

red switch and its direction of operation in the usual way in

the switch select menu which now appears (see Section

17.1 on page 55). The sub-menu now displays ‘ON’ or ‘Off’

according to the position of the switch, and the correspon-

ding Dual Rate option will be displayed in the status line of

the main menu.

• Programming curves

The starting point for this process is to decide on the curve

type. In the main display mark the field which shows the

curr

ent curve type (e.g. ‘Linear’), and this will call up the

next sub-menu in which all six available curve types ar

e dis-

played in symbolic form. Select your preference from this

display.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Robbe Futaba FX-40 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Robbe Futaba FX-40

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info