520094
49
Verklein
Vergroot
Pagina terug
1/105
Pagina verder
Linkage Menu
FX-40
16.14 SWASHPLATE
BASIC SWASHPLATE SETTINGS
This function is used to program the mixer functions required
to actuate the swashplate of a model helicopter
. It is not avai-
l
able if you select the swashplate type SWH1, as no mixers are
required for the collective pitch function with this configura-
tion.
If you activate a model helicopter with any of the other swash-
plate types, you can access this menu to set and reverse the
stick travels of the roll (aileron), pitch-axis (elevator) and col-
lective pitch functions. The essential mixer functions can also
be programmed at this point.
Mark the ‘Swashplate’ option in the base menu. The screen
now looks like this:
The software of the FX-40 provides a very convenient method
of optimising the swashplate settings.
Neutral point adjustment
The first step is to optimise the neutral point setting, which
is enter
ed as a per
centage value. First adjust the servo out-
put arms mechanically, so that the neutral point is close to
50%. Now mark the ‘Sel.’ (select) field, and its background
will turn red. Adjust the position of the collective pitch stick
until the servo output arms are exactly at 90° to the push-
rods. Now press the ‘Sel.’ field again, and read off the dis-
played percentage value; this figure is also displayed in bar
form.
Adjusting stick travel
The stick travel settings can be optimised for the roll, pitch-
axis and collective pitch functions: mark the field in the
swashplate frame, and enter the r
equir
ed percentage value
using the arrow buttons which now appear. The adjustment
range is -100% to +100%; the default setting is 50%.
Pressing the “Reset” field restores the default setting.
You should now use the servo reverse function to correct
the direction of servo rotation where necessary, so that all
the servos move in the same direction when you operate
the collective pitch stick. With these settings correct, set
the appropriate direction of rotation for the pitch-axis and
roll functions by changing the + / - prefix where necessary.
It is important to set the control travels to the largest possi-
ble value without the pushrods or servos striking their end-
stops. Check the maximum control travels carefully when
the collective pitch, roll and pitch-axis functions are at their
extremes of travel. Remember that the swashplate may jam
if you set excessive travels, although this varies according
to the method of actuation and the design of the rotor head.
The swashplate menu has two display levels; pressing the field
at top right takes you to the second level: Swashplate (AFR).
The display changes, and the screen for setting up the mixer
rates appears. It looks like this:
Setting the mixer rates
Example of an HR-3 120° swashplate type with electronic
mixing (ECCPM).
The purpose of adjusting the mixer rates is to obtain even
mixing (as far as possible) of the thr
ee swashplate servos
which ar
e responsible for the control functions roll, pitch-
axis and collective pitch.
Linkage compensation
Any unwanted interactions between the various pushrods
can be corr
ected in the right frame on the second scr
een
page.
Speed compensation
The two roll servos feature shorter control travel at the
swashplate, which can result in an unwanted collective
pitch response when a pitch-axis command is given. At this
point you can set a delay for the roll servos to prevent this
happening.
A detailed description of the swashplate mixer set-up pro-
cedur
e can be found in Part 2 of the “Model Helicopter
Menu” instructions. See Section 19.5 ‘Swashplate mixers’
on page 90.
49
49

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robbe Futaba FX-40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robbe Futaba FX-40 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robbe Futaba FX-40

Robbe Futaba FX-40 Gebruiksaanwijzing - Deutsch - 105 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info