520094
44
Verklein
Vergroot
Pagina terug
1/105
Pagina verder
Linkage Menu
FX-40
VC 1 - 4
This set-up menu is used to configure the virtual func-
t
ions VC 1 … 4. The term ‘virtual function’ is used to des-
cribe functions which use other channels as ‘double
functions’, i.e. they do not have their own servo channels.
Examples of this are the butterfly (crow) function, which
controls the aileron and flap servos, or the elevator func-
tion of a flying wing model, where the ailerons have a dual
function, ‘doubling up’ as elevators.
Each of the FX-40’s virtual functions features its own con-
trol curve (AFR) with 2 … 17 points, providing an extre-
mely straightforward method of adjusting the double
functions separately.
In total the system features sixteen transmitter control
curves (AFR): twelve for functions 1 … 12 plus four for the
virtual functions 1 … 4.
44
Selecting the channel switches
In this menu you can select the transmitter controls to be used
for the switched channels 13 + 14 (PCM G3 system), and for
switched channel 9 (PCM 1024 system).
This is also where you determine the direction of the switching
action of the transmitter contr
ols, and the position at which the
switch is trigger
ed.
PCM G3 system
DG 1 = switched channel 13
DG 2 = switched channel 14
PCM 1024 system
DG 1 = switched channel 9
PPM 8 system
Eight proportional channels; no auxiliary switched channels
available.
Selecting the trims
It is possible to select any trims you wish to use; simply press
the trim button for the function in question, and the trim set-up
menu appears on the screen.
T
rim rate = trim travel setting, infinitely variable from -150 …
+150% of the transmitter contr
ol travel.
Step = trim incr
ement, variable in the range 1 - 200. Maximum
total trim value = 200.
(example: step = 4 x 50 = 200; 200 x 1 = 200; 1 x 200 = 200)
Trim mode
Normal = the normal type of trim: the trim range is symmetrical
around the centr
e point. Adjusting the trim causes the selected
(fixed) trim range to be of
fset around the centre point, with the
result that the servo end-points alter.
ATL = asymmetrical trim: the trim value only changes at one
end of the transmitter control. This is generally used for the
thr
ottle function, as it allows you to fine-tune the idle setting
without altering the full-thr
ottle position.
CTRM = Centre Trim: this trim function also works around the
centre position of the transmitter contr
ol, but without af
fecting
the end-points. Since the end-points are fixed, this trim mode
changes the trim travels, which become asymmetrical.
Sepa / Glob - Separate / Global
The Glob / Sepa button is used to determine whether the trim
control is the same for all flight modes for the function in ques-
tion = Glob (global). If you switch to Sepa (separate), you can
change the trim contr
ol for this function in each of the eight
flight modes. The display changes when you operate the
selected flight mode change-over switch. It is also possible to
set a combination of global and separate-acting trims.
NOTE:
Y
ou can use the option of Global or Separate trims not only to
configure different trim controls for each flight mode, but also
to adjust and stor
e dif
ferent trim values for any particular flight
mode.
Typical applications:
1. Different trim controls for each flight mode
In the Normal flight mode the trim controls T1 + T4 are
assigned to the contr
ol functions J1 + J4, wher
eas in the
‘Aerobatics’ flight mode the trim controls T1 + T4 are assig-
ned to the opposite functions (‘cross trims’). This arrange-
ment enables you to control the function with one hand,
whilst adjusting the trim of the same function with the other
hand.
2. Differ
ent trim values for each flight mode
For model helicopters it can be extr
emely advantageous to
set and store the different trim values for the static ‘Hover’
flight mode and the dynamic ‘Aer
obatics’ flight mode.
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Robbe Futaba FX-40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Robbe Futaba FX-40 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Robbe Futaba FX-40

Robbe Futaba FX-40 Gebruiksaanwijzing - Deutsch - 105 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info