Handleiding Redmond RMC-M13E (pagina 6 van 192) (Alle talen)

659410

Verklein

Vergroot

Pagina terug

1/192

Pagina verder



at room temperature for at least 2 hours before use.

II. OPERATION

Before Use

-

tive coatings, or any other objects or cabinets that could be damaged by steam,

humidity, or high temperatures. Before operating the appliance, ensure that the

outer and inner parts of the pressure multicooker have no dents, cracks or any

other visible damages. There should not be any obstructions between the heat-

ing element and the bowl.

Standby mode

The plugged in appliance has default standby mode setting; current time is

displayed in 24-hour format. If no button was pressed during one minute when

setting selected programme parameters, the appliance will switch to the stand-

by mode; all the previous settings will be cleared.

To adjust the clock

To adjust the current time:

1. Press and hold “Hour/Min” button for several minutes in standby mode.

indicator will be lit on the display; clock register indicator will be



Select clock value rotating adjustment ring this or other way. Repress

“Hour/Min” button to switch the register and turning the adjustment ring

adjust the minute value. After maximum value is reached the adjustment

starts from beginning of the adjustment range.

3. When time adjusting is complete do not press any buttons. The adjusted

time value will be saved in a few seconds.

Enable/disable audible signals

The REDMOND RMC-M13E/RMC-M23E/RMC-M33E multicookers allow to enable/

disable audible signals, that accompany pressing the buttons and the end of

cooking process. To disable/enable audible signals press and hold “Cancel” but-

ton in standby mode.

Non-volatile memory

The REDMOND RMC-M13E/RMC-M23E/RMC-M33E multicookers have non-vol-

-

utes in cooking mode) the appliance saves all settings to the memory. The ap-

pliance will start operation on the interrupted stage. Press the “Cancel” button

if it is undesirable to the continue cooking process. The appliance will switch to

the standby mode.

To adjust cooking time

The REDMOND RMC-M13E/RMC-M23E/RMC-M33E multicookers provide default

cooking time adjusting. Time interval and range depend on selected cooking

programme.

Select the programme rotating the adjustment ring this or that way.



be displayed for every programme.

2. 

3. Select the time value rotating adjustment ring this or that way. Repress

the “Hour/Min” button to switch the register and adjust minute value

turning the adjustment ring. After the maximum value is reached in

every register the adjustment starts from beginning of the adjustment

range.

Time Delay

The time delay function allows adjusting time by which the dish will be ready.

The maximum time of delay is 24 hours in 15 minutes interval. It should be

taken into account that Time of delay should be more than adjusted cooking

time otherwise the programme will start the operation after pressing the “Start/

Keep Warm” button.

Select the programme, adjust the cooking time if necessary. Adjust



Press the “Set” button. The “Time Delay” and the time value indicators will



3. Adjust the time value rotating the adjustment ring. Repress the “Hour/

Min” button to switch the register and adjust the minute value turning

the adjustment ring. After the maximum value is reached in every register

the adjustment starts from beginning of the adjustment range.

Press the “Start/Keep Warm” button. The appliance will switch to the Time

Delay mode, the “Time Delay” and the current time indicators will be lit.

Press the “Hour/Min” button to see the adjusted time by which the food

will be ready.

5. Press the “Cancel” button to clear the current settings. The cooking pro-

gramme should be adjusted all over again.







Keep Warm function

This function automatically activates in the end of cooking cycle and keeps the



disable the Keep Warm press and hold the “Start/Keep Warm” button (the “Keep

Warm” indicator will go out).



leave food heated for a long time, as it may lead to food overdrying and change

in its taste qualities.



-

grammes.



programmes — 4 hours.

Keep Warm disabled in advance

The Keep Warm mode may be disabled in advance if necessary. To do so after the

start of cooking programme repress and hold the “Start/Keep Warm” button

until the “Keep Warm” indicator goes out.

In the same manner the Keep Warm function may be activated again (the “Keep

Warm” indicator will be lit up solid).









Reheat

Provides reheating cold meals:

1. Fill the bowl with food and position it inside the appliance. Ensure it is

tightly connected to the heating element.

2. Close the lid until it clicks into place. Plug in the appliance.

3. Press the “Reheat” button. The “Reheat” indicator will light up solid, the

“Reheat” function will be activated and direct minute countdown will start.

Model RMC-M13E RMC-M23E

RMC-M33E

Bowl type RB-C302 RB-C502

RB-C602

5. Housing

6. Container for condensate collection

7. Control panel with display

8. Adjustment ring

9. Power switch

10. Lid release button

11. Steaming container

12. Measuring cup

13. Serving spoon

14. Stirring paddle

15. Power cord

Elements of control panel

1. Display.

2. Cooking programmes indicators.

“Hour/Min” button— switches on current time adjustment mode; to select

hour/minute value in current time adjustment modes, cooking time and

time delay.

4. “Reheat” button — to enable Reheat function (in standby mode).

“Start/Keep Warm” button with “Start” and “Keep Warm” indicators— to

start cooking programme; to disable Keep Warm in advance.

6. Adjustment ring: to select cooking programme; to adjust current time/

cooking time/ time delay; to adjust temperature in “MULTICOOK” pro-

gramme. Turn the ring clockwise to increase the value, turn the ring

counterclockwise to reduce the value. 16 switches per 360°degree rotation

may be performed.

7. “Keep Warm” indicator is lit up when Keep Warm mode is enabled.

“Cancel” button — to stop cooking programme operation; to clear previous

settings; to enable/disable audible signals (in standby mode).

9. “Set” button — to enable parameter adjusting mode; to switch to cooking

temperature adjusting mode (in “MULTICOOK” programme) / Time Delay.

10.

“Start” indicator lights up during cooking programme operation and Time





Display

A. “Timer” indicator — is lit when adjusting cooking time/ during programme

operation.

“Time Delay” indicator — is lit when adjusting Time Delay / during appliance

operation in Time Delay.

C. Disabled audible signals indicator.

D. Keep Warm indicator.

E. “Reheat” indicator — is lit during Reheat function operation.

F. Temperature value indicator in “MULTICOOK” programme.

I . PRIOR TO THE FIRST USE

Carefully unpack the device, remove all packaging materials and stickers except

the one with the unit’s serial number.



Wipe all interior and exterior surfaces of the unit with a soft, damp cloth. Wash



appliance is normal. In such case, clean the device.

Redmond RMC-M13E Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info