587902
13
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
13
14. Adjust the ignition and
ionisation electrode
in accordance with the sketch
and tighten the clamping screw
4 of the electrode bracket.
The tip of the ionisation
electrode must be in
the vicinity of the flame.
15. Carefully refit all parts of
the unit in reverse order.
Disassembling and cleaning
the gas burner
1. Switch off the gas supply to
the unit and unplug the power
plug from the mains socket.
2. Remove the protective outlet
grille, exterior cladding and
inspection cover.
3. Undo the clamping screw 5
of the nozzle holder.
4. Remove the ignition cable from
the ignition electrode.
5. Detach the ionisation cable from
the ionisation electrode. Be
aware of the cap nut and spring
washer!
6. Loosen the clamping screw 4
on the electrode bracket and
carefully draw out the ignition
and ionisation electrode.
7. Carefully remove any adhered
deposits from the ignition and
ionisation electrode.
8. Detach the fastening screws
of the gas burner and remove
the complete gas burner from
the unit.
9. Carefully clean the gas burner
with a suitable brush and
possibly compressed air.
10. Clean the gas nozzle if
necessary.
Do not use any sharp-edged
objects!
11. Carefully remove deposits
or soiling in the unit base.
12. After all cleaning work on
the gas burner, carefully refit
all parts in reverse order.
13. After using the gas nozzle,
tighten clamping screw
5 again.
Unit type A B
PGT 30
approx. 3 mm approx. 15 mm
PGT 60
approx. 3 mm approx. 15 mm
PGT 100
approx. 3-4 mm
approx. 30 mm
Legend:
1 = Gas burner
2 = Ionisation electrode
3 = Ignition electrode
4 = Clamping screw (electrodes)
5 = Clamping screw (gas nozzle)
1
4
2
3
5
A
B
Gas burner
for example with:
Soap solution
or
leak detection
spray.
Check the inlet and outlet grille
for contamination on a regular
basis
Check hoses and seals for
damage on a regular basis
Replace damaged hoses, seals,
etc. immediately
Clean the gas burner, gas
nozzle and the combustion air
openings regularly
Check ignition and ionisation
electrodes regularly and adjust
and clean if necessary
NOTE
Adjustment and maintenance
work may only be carried out
by authorised and qualified
technicians.
CAUTION
An electrical safety check must
be carried out in accordance
with VDE 0701 after any work
on the units.
NOTE
Replace defective or damaged
parts immediately and
exclusively with original spare
parts.
NOTE
A strongly yellowy flame
indicates an inadequate
fresh air supply or dirt inside
the unit.
CAUTION
A functional inspection of
the entire unit including leak
testing of all gas-conveying
connections must be
conducted
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw REMKO PGT 60E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van REMKO PGT 60E in de taal/talen: Engels als bijlage per email.

De handleiding is 1,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van REMKO PGT 60E

REMKO PGT 60E Gebruiksaanwijzing - Nederlands - 24 pagina's

REMKO PGT 60E Gebruiksaanwijzing - Deutsch - 28 pagina's

REMKO PGT 60E Gebruiksaanwijzing - Français - 28 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info