No Steam From Steam Wand - Verify the machine is up to operating
temperature. Check the steam tip holes for a milk blockage. Clean holes with
a paper clip or unscrew steam tip to clean trapped milk inside tip and/or arm.
No Water From Hot Water Wand - Verify the machine is up to operating
temperature. Check the steam tip holes for a milk blockage. Clean holes with
a paper clip or unscrew steam tip to clean trapped milk inside tip and/or arm.
Milk Frother Not Working - Verify the machine
is up to temperature. Disassemble and clean
the frother parts. Frother pulls apart for easy
cleaning. Special attention should be made to
the small hole shown in the picture to the right.
Use a small paper clip to clean out the hole
and then wash the pieces with mild dish
detergent. The frother should not be put in a
dish washer.
Steam Temperature Alarm - The steam temperature alarm may appear at
various stages of use. Whenever there is a large discrepancy between the
actual temperature and the set temperature the alarm may appear to let the
user know. This does not necessarily mean there is a problem and in most
cases the alarm will clear itself once the machine goes into a heating cycle.
If the alarm does not clear then turn off the main power switch and unplug
the machine and then restart the machine. If this does not clear the alarm
then contact your dealer for technical support before attempting any repairs.
Not Heating ± Make sure the machine has
been turned on for at least 15 minutes.
With the machine unplugged, firmly press
the red reset button on top of the boiler
shown in the picture to the right.
