25
English
TIMER mode in 2 to 3 minutes.
[TIMER OPERATION]
● Restart and stop of the timer can be repeated by pressing button C.
● Even if the TIMER mode is changed to another while the measurement is in progress,
it continues counting properly. After the timer is used, however, be sure to reset it as
the battery energy is consumed enormously to shorten the battery life.
WORLD RESORT TIME MODE
● The time differences and use of daylight saving time may change in some areas or
countries when they are so decided by the countries concerned.
ILLUMINATING LIGHT (Electroluminescent panel)
● The electroluminescent panel loses its luminance as the battery voltage gets lowered.
Also, its luminance level decreases gradually with use. After 120 hours of use, the level
decreases by about half.
● When the illuminating light becomes dim, replace the battery with a new one. If the light
remains dim after the battery is replaced, have the electroluminescent panel replaced
with a new one by the retailer from whom the watch was purchased. It will be replaced
at cost.
● While the illuminating light is used, the watch gives out a slight noise. However, this
is not a malfunction.
[TURNING ON/OFF OF BUTTON OPERATION CONFIRMATION LIGHT]
● This function is deactivated automatically in 11 to 12 hours after it is activated.
