23
English
and becomes lower as they decrease.
● The contrast level has been initially set at “10” at the factory.
● When the contrast level is set to “0”, the digits on the display will be unable to read.
● With each press of buttons C and E, the contrast level increases and decreases by one,
respectively.
ALARM MODE
[ALARM TIME SETTING]
● The flashing digits move quickly if button C or E is kept pressed.
● If the watch is left untouched with the digits flashing, it will automatically return to the
ALARM mode in 2 to 3 minutes.
● When the time function is displayed in the 24-hour indication, the alarms are also
displayed in the 24-hour indication.
[ALARM ENGAGEMENT/DISENGAGEMENT]
● When any one of the alarms is engaged, the alarm mark is displayed.
● Alarm test: The alarm can be tested by keeping buttons C and D pressed in the TIME/
CALENDAR mode.
STOPWATCH MODE
● After 10 hours have been measured, the stopwatch continues measuring from “00”.
If it is left counting for more than 100 hours, it will automatically be stopped.
● Restart and stop of the stopwatch can be repeated by pressing button C.
● Measurement of the lap time and split time can be repeated by pressing button E.
● The lap number counts up to “199”. After “199”, the number is displayed in two digits
such as “00” for 200, “01” for 201, and so on.
