782214
12
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
In this way, soft and hard woods, plates, non-ferrous
metal or steel, even plastic, cork, rubber and many
further materials can be processed with high preci-
sion at grinding speeds of approx. 250-800 m/min
(adjustable).
The various fixing possibilities ensure particular flexi-
bility: Your TG 125/E can be operated both in "normal
position" and in standing, with the grinding table
removed. To this end, it is fixed with the enclosed
clamp.
The grinding table is made of high-grade aluminium
and can be adjusted upwards by 10° and downwards
by 50°. This also includes the guide slot for the angle
stop that is also included in the scope of delivery.
Two grinding wheels in each of the grain sizes offered
of 80, 150 and 240 are included in the scope of deliv-
ery.
In order that the swarf goes directly where it should,
namely into the vacuum cleaner, there is a connecting
piece to which the vacuum cleaner can be connected.
So you are optimally equipped for the grinding work.
3 Scope of delivery
1 x TG 125/E disc grinding machine
1 x Angle stop
1 x Connecting piece
1 x Rubber connector
2 x Grinding wheels grain 80
2 x Grinding wheels grain 150
2 x Grinding wheels grain 240
1 x Operating instructions
1 x Brochure with safety instructions
1 x Vice
4 Technical data
Dimensions and weights:
Length: approx. 300 mm
Width: approx. 140 mm
Height: approx. 160 mm
Weight: approx. 3 kg
Ø Grinding disc: 125 mm
Dimensions grinding table: 98 x 140 mm
Motor:
Voltage: 230 volt,
50/60 Hz
Power input: 140 watt
KB 15 min
Speed: max. 3600 rpm
Grinding speed: approx. 250-800 rpm
Noise development: < 55 dB(A)
Vibration: 2,5 m/s2
General measuring uncertainty: K=3 dB
Only in dry rooms
Please do not dispose of this electrical
machine in the household refuse!
Wear safety glasses!
Noise/vibration information
The information on vibration and noise emission has
been determined in compliance with the prescribed
standardised and normative measuring methods and
can be used to compare electrical devices and tools
with each other.
These values also allow a preliminary evaluation of
the loads caused by vibration and noise emissions.
Warning!
Depending on the operating conditions while operat-
ing the device, the actually occurring emissions could
differ from the values specified above!
Please bear in mind that the vibration and noise
emission can deviate from the values given in these
instructions, depending on the conditions of use of
the tool. Poorly maintained tools, inappropriate work-
ing methods, different work pieces, too high a feed or
unsuitable work pieces or materials or unsuitable bits
and cutters (here: saw blade) can significantly
increase the vibration load and noise emission across
the entire work period.
To more accurately estimate the actual vibration and
noise load, also take the times into consideration
where the device is switched off, or is running but is
not actually in use. This can clearly reduce the vibra-
tion and noise load across the entire work period.
Warning:
Ensure regular and proper maintenance of your
tool
Stop operation of the tool immediately if excessive
vibration occurs!
Unsuitable bits and cutters can cause excessive
vibration and noises. Only use suitable bits and
cutters!
Take breaks if necessary when working with the
device!
- 12 -
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Proxxon TG 125-E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Proxxon TG 125-E in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Turks, Deens, Zweeds als bijlage per email.

De handleiding is 3.16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info