782216
13
Verklein
Vergroot
Pagina terug
1/78
Pagina verder
- 13 -
Take breaks if necessary when working with the device!
Commissioning and operation
General handling of the device:
CAUTION!
• Do not work with damaged or worn bits and cutters!
Make sure the tools are in perfect condition. Damaged
or worn tools can break and cause injuries!
• Never press the lock button if the bits and cutters and
are still rotating.
• Please note: The utilised bits and cutters may not ex-
ceed a maximum diameter of 50 mm!
• Make sure that the permissible maximum speed of the
bits and cutters does not undershoot the speed of the
device! The tool can break when the maximum per-
missible speed is exceeded. Flying parts can cause
damage and severe injuries!
• Never work without dust protection mask and safety
glasses. Some dusts have a hazardous effect! Materi-
als containing asbestos may not be machined!
• Do not work with damaged tools!
• Ensure the work piece is fixed securely! Loose work
pieces should be clamped in a suitable fixture. This
prevents the work pieces from flying about.
• A correct and uniform speed achieves a high grinding
performance, not excessive contact pressure! Exces-
sive pressure is to be avoided: it only stresses the de-
vice and can even damage the bits and cutters!
• Hold the device without covering the ventilation slots.
If it overheats, you absolutely must shut off the device
and allow it to cool down.
• Do not use the cutting disc for rough-machining. Risk
of fracture!
• Work only with a correctly adjusted protective guard!
• When storing the bits and cutters, make sure they are
reliably protected from damage!
Hold the device by the insulated gripping surfaces, as
the grinding surface can hit its own connecting cable.
Damage to a “live” wire can stress metal parts and
cause an electric shock.
Replacing the Grinding Disc
Your LHW long-neck angle grinder is ready for opera-
tion on delivery.
Pre-assembled with a fan sander with grain 100 and 50
mm diameter, ideal for grinding and smoothing mal-
leable cast iron, grey cast iron, stainless steel, steel,
non-ferrous metal, wood and plastic.
The supplied high-grade corundum sanding disc is ideal
for roughing, grinding, sharpening and removing rust
from metal or non-ferrous metal, and the included
corundum-bound cutting disc is perfect for abrasive
cutting of steel, non-ferrous metal, plastic or wood.
We also have a great number of additional problem
solvers in our comprehensive range of accessories.
1. Press the locking button 1 (Fig. 2).
2. Turn the fastening screw 4 using an Allen key 5 un-
til the locking button engages.
3. Undo the fastening screw 4, remove the centring
disc 3 and the grinding disc 2.
4. Fit a new grinding disc.
5. Press the locking button 1 and tighten the fasten-
ing screw 4.
Adjust the protective guard.
IMPORTANT!
Disconnect the plug from the mains before the follow-
ing.
1. Release fastening screw 1 (Fig. 3) and turn the
protective guard to the desired position.
2. Retighten the fastening screw.
Using the unit
1. Switch the unit on via the switch 3 (Fig. 1).
NOTE!
Do not press too hard when using the grinder. Good
grinding performance can only be achieved using the
correct and constant rotational speed.
To achieve the best results when roughening, apply
the grinding disc to the grinding surface at an angle
of between 30° and 40° and move evenly back and
forth over the workpiece.
Do not bend the grinding disc into the cutting surface
during cutting work.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Proxxon LHW bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Proxxon LHW in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Turks, Deens, Zweeds als bijlage per email.

De handleiding is 4.13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info