782216
11
Verklein
Vergroot
Pagina terug
1/78
Pagina verder
- 11 -
dust generated during the operation. If you are ex-
posed to loud noise for a long time, you may suffer
hearing loss.
i) Keep other people at a safe distance away from
your work area. Anyone who enters the working
area must wear personal protective equipment.
Fragments of the work piece or broken bits and cut-
ters can fly away and cause injuries even beyond the
immediate area of work.
j) Hold the device only by its insulated grip surfaces
if you perform work where the bits and cutters
could contact hidden power cables or your own
mains cable. Contact with a live cable can energize
metal device parts and cause electric shock.
k) Keep the mains cable away from rotating bits and
cutters. If you lose control of the device, the mains
cable could be cut or snagged, and your hand or
your arm could get pulled into the rotating bits and
cutters.
l) Never set down the power tool until the bits and
cutters come to a complete stop. Turning bits and
cutters grab the depositing surface and pull the
power tool out of your control.
m) Do not allow the power tool to run while you are
carrying it. Your clothing could get snagged acci-
dentally in the rotating bits and cutters, causing the
power tool to pierce your body.
n) Regularly clean the ventilation slits of your power
tool. The motor fan sucks dust into the housing and
a strong accumulation of metal dust can cause elec-
trical hazards.
o) Do not use the power tool in the vicinity of com-
bustible materials. Sparks could ignite these ma-
terials.
p) Do not use bits and cutters that require liquid
coolants. The use of water or other liquid coolants
can cause electric shock.
Additional safety guidelines on grinding and abrasive
cutting.
a) Special safety guidelines on grinding and abra-
sive cutting:
b) Use only the grinding tools approved for your
power tool and the protective guard designed for
these grinding tools. Grinding tools that are not
designated for the power tool cannot be adequately
guarded and are therefore unsafe.
c)
The protective guard must be attached securely to
the power tool and adjusted in such a way as to
achieve maximum safety, i.e. the smallest possible
part of the grinding tool is open to the operator. The
protective guard is meant to protect the operator from
fragments and accidental contact with the grinding
tool.
d) Grinding tools may only be used for the recom-
mended applications. For example: Never grind
with the lateral surface of a cutting disc. Cutting
discs are intended for removing material with the
edge of the disc. Lateral forces on these grinding
tools can shatter them.
e) Always use undamaged clamping flanges in the
correct size and shape for your selected sanding
disc. Suitable flanges support the sanding disc and
reduce the danger of sanding disc breakage.
Flanges for cutting discs can differ from other sand-
ing disc flanges.
f) Do not use worn sanding discs from larger power
tools. Sanding discs for larger power tools are not
designed for higher rotational speeds of smaller
power tools and can shatter.
Further special safety guidelines on abrasive cutting:
a) Avoid jamming the cutting disc or applying too
great contact pressure. Do not make excessively
deep cuts. Overstressing the cutting disc increases
its load and its susceptibility to twisting or jamming
and thus the possibility of recoil or grinding tool
breakage.
b) Avoid the area in front of and behind the rotating
cutting disc. If you move the cutting disc in the
work piece away from you, recoil may catapult the
power tool with the rotating disc directly towards
you.
c) If the cutting disc binds or if you interrupt work,
switch off the device and hold it still until the disc
has come to a complete stop. Never attempt to
pull the running cutting disc out of the cut, other-
wise recoil may occur. Determine and eliminate the
cause for binding.
d) Do not switch the power tool back on as long as it
is in the work piece. Allow the cutting disc to
reach its full rotational speed before carefully
continuing the cut. Otherwise, the disc can get
snagged, jump out of the work piece or cause recoil.
e) Support sheets or large work pieces to minimize
the risk of recoil caused by a jammed cutting disc.
Large work pieces can sag under their own weight.
The work piece must be supported on both sides of
the disc; namely near the separating cut as well as
at the edge.
f) Be especially careful when making “pocket cuts”
in existing walls or other blind areas. The dipping
GB
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Proxxon LHW bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Proxxon LHW in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Turks, Deens, Zweeds als bijlage per email.

De handleiding is 4.13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info