782201
6
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
Technical data to FD 150/E Lathe:
Voltage: 230 Volt
Frequency: 50/60 Hz
Capacity: 100 watt
Length between centres: 150 mm
Height of centres: 55 mm
Height via support: 33 mm
Capacity of inside jaw: 1–20mm
Capacity of outside jaw: 20 –60mm
Cross slide adjustment: 40 mm
Upper carriage adjustment: 60 mm
Spindle bore: 8.5 mm
Cone holding fixture, chuck side: for ER 11 collets
Tool holder for tools: 6x6
Noise level: <70dB(A)
Device dimensions: 360 x150 x150
Weight: approx. 4.5 kg
Spindle speeds:
-ingearbox stage 1: 800 –2800 rpm
-ingearbox stage 2: 1500 –5000 rpm
Noise/vibration information
The information on vibration and noise emission has been de-
termined in compliance with the prescribed standardised and
normative measuring methods and can be used to compare elec-
trical devices and tools with each other.
Thesevalues also allow apreliminaryevaluation of the loads
caused by vibrationand noise emissions.
Warning!
Depending on the operating conditionswhile operating the de-
vice, the actually occurring emissions could differ from the val-
ues specified above!
Please bear in mind that the vibration and noise emission can de-
viate from the values given in these instructions, depending on
the conditions of use of the tool. Poorly maintained tools, inap-
propriate working methods, different work pieces, too high a
feed or unsuitable work pieces or materials or unsuitable bits and
cutters can significantly increase the vibration load and noise
emission across the entire work period.
To more accurately estimate the actual vibration and noise load,
also take the times into consideration where the device is
switched off, or is running but is not actually in use. This can
clearly reduce the vibration and noise load across the entire work
period.
Warning:
•Ensure regular and proper maintenance of your tool
•Stop operation of the tool immediately if excessive vibration
occurs!
•Unsuitable bits and cutters can cause excessive vibration and
noises. Only use suitable bits and cutters!
•T
ake breaks if necessarywhen working with the device!
Only to be operated in closed rooms!
Do not dispose of the electrical device in the
household waste!
Always work with hearing protection!
Wear safety glasses!
Danger!
Ensure that no clamping pins or keys remain in the holes in
the chuck intended for this purpose after clamping!
Activation of the machine while clamping pins are in the chuck
holes can fling these out or lead to jamming during starting.
Be sure to ensure that the turning jaws are tightened securely be-
fore switching on the device since they could be loosened by
centrifugal force if there is no resistance.
Serious injuries or material damage
may result as aconsequence of this!
Set-up and commissioning
Danger!
Possibility of unexpected start-up! Injuries could be the result.
Therefore, always disconnect the mains plug for all adjust-
ment and maintenance work!
Setting up the device (Fig. 2a and Fig. 2b):
Caution!
Please check the device for any signs of damage in transit im-
mediately upon unpacking!Damaged packaging may already in-
dicate improper handling during transportation. Damage in tran-
sit must be claimed immediately with your dealer or the corre-
sponding transport company!
The following elements are included with the standard equip-
ment of the PROXXON FD 150/E lathe:
•Three-jaw chuck
•Chuck guard
•Travelling lathe centre
•Set of tools
•Tool holder
DANGER!
-17-
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Proxxon FD 150-E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Proxxon FD 150-E in de taal/talen: Engels als bijlage per email.

De handleiding is 1.46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info