490600
20
Verklein
Vergroot
Pagina terug
1/136
Pagina verder
20
Non-ferrous Metals
Use only a suitable and sharp saw blade.
This ensures a clean cut and prevents jam-
ming of the saw blade.
Apply the machine running to the workpiece,
carefully start sawing and then saw with
slow feeding and without interruption.
For pro les, always start the cut on the small
side; for U-pro les, never start the cuts on
the open side.
Support long pro le, otherwise the saw
blade can become jammed when the pro le
tips over and the machine can “kick back”.
Material with Mineral Content
(Light building material)
Only dry cutting is permitted.
Use vacuum dust extraction. The vacu-
um cleaner must be suitable for masonry
dust.
9 Use of Accessories
The machine has a longitudinal slot at the
base plate underside to take up a guide rail.
With this guide rail, it is made easy to carry
out larger cuts.
PROTOOL Guiding System
For easy and safe handling when cutting
large work pieces as well as for achiev-
ing exact angle cuts, the use of the
GRP 800/1400/3000-2 guiding system is
recommended.
With it, clean cuts are possible by preci-
sion guiding of the machine along a cutting
line. In addition, the hard anodising of the
guide rail makes possible easy gliding of the
machine and thereby reduces the required
advancing force while improving the work
progress.
The saw’s side suction clearance on the bar
is possible to adjust with the adjusting nobs
[6-1].
Mounting the Guide Rail
(GRP 800/1400/3000-2)
The mounting of the guide rail [7-1] takes
place with the use of the special screw
clamps CL-GRP 300 [7-2] which are slid
into the receptacle slots provided (Figure
[7a]). This makes secure holding possible
also on uneven surfaces. In addition, the
Anti-slip Coating” applied to the underside
of the guide rail ensures secure contact and
prevents scratches on sensitive material
surfaces.
Mounting the Connection Piece
(CN-GRP)
Depending on the application and the size
of the work piece, several guide rails can be
connected together (Figure [7c]) with the
use of the connection piece [7-4]. For the
permanent connection of several guide rails,
the connection pieces can be fastened with
screws at the respective threaded holes.
Mounting the Angle Unit (GRP-AG-2)
The combination of the guide rail and the
continuously adjustable angle unit [7-3]
makes possible exact angle cutting, e. g.,
for tting work. The angle unit is mounted
according to Figure [7b]. On the scale, the
required angle can be set.
When sawing with the PROTOOL GRP
guiding system, 4.5 mm is always to be
added to the necessary cutting depth.
Saw Table
Additional application possibilities are avail-
able with the use of a saw table. Further
information in this regard is available from
your dealer.
10 Maintenance
- The unit should be stored in a dry place
where it is protected against freezing.
WARNING
To verify that the protective insulation
remains intact, the machine must be
subjected to a technical safety test
afterwards. For this reason, this work
must be performed exclusively by a
professional electro-workshop.
- With each changing of the saw blade, re-
move deposited saw dust from the inside
of the protective guard.
- The ventilation slots on the motor casing
should be cleaned out from time to time.
After an operating period of approx. 200
hours, the following maintenance work
must be performed:
- Check the motor brushes and replace if
necessary. Clean the motor housing.
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Protool CSP 56-2 EB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Protool CSP 56-2 EB in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 11,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info