Fan blade assembly
Insert the fan blade onto the motor spindle, making sure the motor spindle is fully
seated into the blade groove. Screw the retaining nut of the fan blade in an
anti-clockwise direction to tighten the fan blade to the motor spindle.
Front guard assembly
Attach the front guard to the rear grill ensuring the side and bottom clips are clamped
to secure two guards. Secure in position by tightening the screw.
OPERATION
1. Once the fan has been assembled correctly connect the mains plug to the mains
socket.
2. To turn fan on press
on the control box or on the remote.
y When fan is on, it will start in low speed and the display shows “SPEED 1”.
Repeatedly press to select the desired fan speed from 1 to 4.
3. To turn fan off press
on the control box again or on the remote.
4. To make the fan oscillate press repeatedly and the
fan will oscillate in horizontal or vertical or both
directions.
y The corresponding light will illuminate to show what oscillation mode you
choose.
y To stop the fan from oscillating, press repeatedly until the light go out.
5. Tilting Adjustment
The airflow can be adjusted upward or downward by simply pushing the guard up
or down as required.
6. Mode
Press repeatedly to select the desired wind mode. The corresponding light
will illuminate to show what wind mode you choose.
Normal wind Natural wind Sleep wind
7. Timer
You can set the fan to automatically turn itself off within a desired time period
4
