553942

Pro-form 490 STRIDE CLIMBER - PFEL04909 Handleiding

21
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Serial Number Decal
(on underside of frame)
Model No. PFEL04909.0
Serial No.
Write the serial number in the
space above for reference.
USERʼS MANUAL
www.proform.com
QUESTIONS?
If you have questions, or if parts are
damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT:Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.proformservice.com
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
I
MPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO USE THE ELLIPTICAL EXERCISER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
2
WARNING DECAL PLACEMENT
This drawing shows the location(s) of the warning
decal(s). If a decal is missing or illegible, see
the front cover of this manual and request a
free replacement decal. Apply the decal in the
location shown. Note: The decal(s) may not be
shown at actual size.
PROFORM is a registered trademark of ICON IP, Inc.
3
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over age 35 or per-
sons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of the elliptical exerciser are
adequately informed of all precautions.
3. The elliptical exerciser is intended for home
use only. Do not use the elliptical exerciser
in a commercial, rental, or institutional set-
ting.
4. Keep your elliptical exerciser indoors, away
from moisture and dust. Place the elliptical
exerciser on a level surface, with a mat
beneath it to protect the floor or carpet.
Make sure that there is at least 3 ft. (0.9 m)
of clearance in the front and rear of the ellip-
tical exerciser and 2 ft. (0.6 m) on each side.
5. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
6. Keep children under age 12 and pets away
from the elliptical exerciser at all times.
7. The elliptical exerciser should not be used
by persons weighing more than 275 lbs.
(125 kg).
8. Wear appropriate exercise clothes while
exercising; do not wear loose clothes that
could become caught on the elliptical exer-
ciser. Always wear athletic shoes for foot
protection.
9. Hold the upper body arms when mounting,
dismounting, or using the elliptical exerciser.
10. Keep your back straight while using the
elliptical exerciser; do not arch your back.
11. The pulse sensor is not a medical device.
Various factors, including the userʼs move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
12. When you stop exercising, allow the pedals
to slowly come to a stop.
13. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
14. Use the elliptical exerciser only as described
in this manual.
WARNING:To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your elliptical exerciser before using your elliptical
exerciser. ICON assumes no responsibility for personal injury or property damage sustained by or
t
hrough the use of this product.
IMPORTANT PRECAUTIONS
4
BEFORE YOU BEGIN
Pulse Sensor
Upper Body Arm
Wheel
Pedal
Roller
Water Bottle Holder*
Leveling Foot
*Water bottle is not included
Track
Fan
Console
Thank you for selecting the innovative PROFORM
®
S
TRIDE CLIMBER 490 elliptical exerciser. The
STRIDE CLIMBER 490 elliptical exerciser provides an
impressive selection of features designed to make
your workouts at home more effective and enjoyable.
For your benefit, read this manual carefully before
you use the elliptical exerciser. If you have ques-
tions after reading this manual, please see the front
cover of this manual. To help us assist you, note the
p
roduct model number and serial number before con-
tacting us. The model number and the location of the
serial number decal are shown on the front cover of
this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Selector
5
ASSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call 1-800-445-2480.
A
ssembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver , an adjustable
wrench , and a rubber mallet .
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe-
ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The
number following the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware
kit, check to see if it has been preassembled.
M8 x 50mm Button
Screw (65)–2
M10 x 20mm Button
Screw (58)–4
M8 x 16mm Button
Screw (53)–4
M10 x 25mm
Washer (52)–4
19mm Wave
Washer (71)–4
M8 x 25mm
Washer (54)–4
M4 x 19mm
Screw (75)–4
M4 x 50mm
Screw (76)–4
M8 x 30mm Button
Screw (67)–4
M8 x 20mm Button
Screw (77)–2
M8 x 35mm Button
Screw (80)–2
6
7
76
2
1
9
9
2
65
53
54
2
1
2. Insert the Track (2) into the Frame (1). Attach
the Track with two M8 x 50mm Button Screws
(65), two M8 x 16mm Button Screws (53), and
two M8 x 25mm Washers (54). Do not tighten
the Button Screws yet.
1.
Tip: It may be easier to do this step if you
l
oosen the two Leveling Feet (9) at the rear
of the Track (2).
Orient the Track Cover (7) and the Track (2) as
shown. Attach the Track Cover to the Track with
four M4 x 50mm Screws (76).
To make assembly easier, read the
information on page 5 before you begin.
7
3. Have another person hold the Upright (3) in the
position shown. Insert the Wire Harness (73)
upward through the Upright. Tip: Use an elas-
t
ic band or tape to prevent the Wire Harness
from falling into the Upright.
Tip: Avoid pinching the Wire Harness (73)
during this step. Insert the Upright (3) into the
Frame (1). Attach the Upright with two M8 x
16mm Button Screws (53) and two M8 x 35mm
Button Screws (80). Do not tighten the Button
Screws yet.
3
3
1
73
53
80
53
80
Avoid pinching the
Wire Harness (73)
during this step
4
36
22
67
37
4. Identify the Right Upper Body Arm (36), which is
marked with an “R” sticker.
Slide the Right Upper Body Arm (36) onto the
Right Upper Body Leg (37). Attach the Right
Upper Body Arm with two M8 x 30mm Button
Screws (67).
Attach the Left Upper Body Arm (22) in the
same way.
8
5
4
Batteries
Cover
Tabs
6
6. While another person holds the Console (4)
near the Upright (3), connect the console wire to
the Wire Harness (73). Insert the excess wire
downward into the Upright.
Tip: Avoid pinching the wires during this
step.Attach the Console (4) to the Upright (3)
with four M4 x 19mm Screws (75).
Console
Wire
73
75
3
4
Avoid pinching the
Wire Harness (73)
during this step
5. The Console (4) can use four D batteries (not
i
ncluded); alkaline batteries are recommended.
IMPORTANT: If the Console has been
exposed to cold temperatures, allow it to
warm to room temperature before inserting
batteries. If you do not do this, you may
damage the console displays or other elec-
t
ronic components. Press the two tabs on the
battery cover and remove it. Next, orient four
batteries as shown by the markings inside the
battery compartment, and insert the batteries
into the Console. Then, reattach the battery
cover.
To purchase an optional AC adapter, contact
the store where you purchased this product
or call the telephone number on the front
cover of this manual. To avoid damaging the
console, use only a manufacturer-supplied
AC adapter. Plug one end of the AC adapter
into the jack on the console; plug the other end
into an outlet installed in accordance with all
local codes and ordinances.
9
39
Grease
38
77
54
44
5
7. Identify the Right Pedal Leg (38) and the Right
LinkArm (39), which are marked with “R” stick-
ers. Orient both parts as shown.
Apply a generous amount of grease to the axle
o
n the Right Pedal Leg (38). Slide the Selector
(5) on the Right LinkArm (39) onto the axle.
Attach the Selector with an M8 x 20mm Button
Screw (77), a LargeAxle Cover (44), and an M8
x 25mm Washer (54).
Repeat this step with the Left Link Arm (not
shown) and the Left Pedal Leg (not shown).
7
37
Grease
38
39
71
8. Apply a generous amount of grease to the axle
on the Right Upper Body Leg (37) and to the
right CrankArm (31).
Next, apply a small amount of grease to two
19mm Wave Washers (71).
Slide one 19mm Wave Washer (71) onto the
Right Upper Body Leg (37), and slide the other
19mm Wave Washer (71) onto the right Crank
Arm (31).
At the same time and with the help of another
person, slide the Right Pedal Leg (38) onto the
Right Upper Body Leg (37) and slide the Right
LinkArm (39) onto the right CrankArm (31).
Repeat this step for the other side of the
elliptical exerciser.
8
71
31
Grease
10
37
38
5
8
46
52
58
46
52
9. Attach the Right Pedal Leg (38) to the Right
Upper Body Leg (37) with an M10 x 20mm
Button Screw (58), a SmallAxle Cover (46), and
a
n M10 x 25mm Washer (52).
A
ttach the Right LinkArm (39) to the right Crank
Arm (31) with an M10 x 20mm Button Screw
(58), a SmallAxle Cover (46), and an M10 x
25mm Washer (52).
Repeat this step for the other side of the
elliptical exerciser.
9
31
10. Tighten the two M8 x 16mm Button Screws (53)
and the two M8 x 35mm Button Screws (80) in
the Frame (1).
Locate the two M4 x 19mm Screws (75) in the
sides of the Upright (3). Slide the Water Bottle
Holder (6) against the Upright and downward
onto the two Screws. Then, tighten the Screws.
10
6
75
53
80
39
75
3
1
11
27
39
25
27
2
11. Lift the Left and Right Link Arms (25, 39) and
set the Rollers (27) on the Track (2). Make sure
that the Rollers are centered on the Track. If
n
ecessary, move the Track to the right or to the
left until the Rollers are centered on the Track.
See step 2. With the help of another person,
tighten the M8 x 50mm Button Screws (65) and
the M8 x 16mm Button Screws (53).
12. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be
left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the
elliptical exerciser.
11
12
HOW TO USE THE ELLIPTICAL EXERCISER
HOW TO MOVE THE ELLIPTICAL EXERCISER
Due to the size and weight of the elliptical
exerciser, moving it requires two persons. Stand in
front of the elliptical exerciser, hold the upright, and
place one foot against one of the front wheels. Pull on
the upright and have a second person lift the track
until the elliptical exerciser will roll on the front wheels.
Carefully move the elliptical exerciser to the desired
location, and then lower it to the floor.
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical exerciser rocks slightly on your floor
during use, turn one or all of the leveling feet beneath
the track until the rocking motion is eliminated.
HOW TO EXERCISE ON THE ELLIPTICAL
EXERCISER
To mount the elliptical exerciser, hold the upper body
arms and step onto the pedal that is in the lower posi-
tion. Then, step onto the other pedal.
Push the pedals until they begin to move with a con-
tinuous motion. Note: The crank arm covers can
turn in either direction. It is recommended that
you turn the crank arm covers in the direction
shown by the arrow; however, for variety, you can
turn the crank arm covers in the opposite direc-
tion.
To dismount the elliptical exerciser, wait until the ped-
als come to a complete stop. Note: The elliptical
exerciser does not have a free wheel; the pedals
will continue to move until the flywheel stops.
When the pedals are stationary, step off the higher
pedal first. Then, step off the lower pedal.
Pull on the
upright
Lift
here
Pedals
Upper Body
Arms
Place
your foot
here
Crank
Arm
Cover
13
HOW TO ADJUST THE SELECTORS
The pedals on the elliptical exerciser move your feet in
a natural elliptical path. You can adjust the elliptical
exerciser so that the pedals move in a more vertical
path or a more horizontal path.
To adjust the elliptical exerciser so that the pedals
m
ove in a more vertical path, pivot the two selectors
to the high position; to adjust the elliptical exerciser so
that the pedals move in a more horizontal path, pivot
the selectors to the low position. IMPORTANT: Make
sure to adjust both selectors to the same position.
Selector
Pedals
Low Position
High Position
14
FEATURES OF THE CONSOLE
The advanced console offers an array of features
designed to make your workouts more effective and
enjoyable. When you select the manual mode of the
console, you can change the resistance of the pedals
with the touch of a button. As you exercise, the con-
sole will provide continuous exercise feedback. You
can even measure your heart rate using the handgrip
pulse sensor.
The console also offers four preset workouts. Each
workout automatically changes the resistance of the
pedals and prompts you to increase or decrease your
pedaling pace as it guides you through an effective
workout.
In addition, the console features two heart rate work-
outs that change the resistance of the pedals to keep
your heart rate near target heart rate settings while
you exercise.
The console features the iFit Interactive Workout
System, which enables the console to accept iFit
cards containing workouts designed to help you
achieve specific fitness goals. For example, lose
unwanted pounds with the 8-week Weight Loss work-
out. iFit workouts control the resistance of the pedals
while the voice of a personal trainer coaches you
through your workouts. iFit cards are available sepa-
rately. To purchase iFit cards, go to www.iFit.com
or see the front cover of this manual. iFit cards are
also available at select stores.
You can even connect your MP3 player or CD player
to the consoleʼs sound system and listen to your
favorite music or audio books while you exercise.
To use the manual mode, see page 15. To use a
preset workout, see page 17. To use a heart rate
workout, see page 18. To use an iFit workout, see
page 19. To use the sound system, see page 19.
CONSOLE DIAGRAM
15
H
OW TO USE THE MANUAL MODE
Note: If there is a sheet of clear plastic on the face of
the console, remove the plastic.
1. Press any button on the console or begin ped-
a
ling to turn on the console.
When you turn on the console, the display and the
target pacer coach will turn on. Atone will then
sound and the console will be ready for use.
2. Select the manual mode.
When you turn on the console, the manual mode
will be selected. If you have selected a workout,
reselect the manual mode by pressing any of the
Quick Workouts buttons repeatedly until a track
appears in the left display.
3. Begin pedaling and change the resistance of
the pedals as desired.
As you pedal, change
the resistance of the
pedals by pressing the
Quick Resistance but-
tons. Note: After you
press the buttons, it
will take a moment for the pedals to reach the
selected resistance level.
4. Follow your progress with the displays.
The upper right
display can show the
elapsed time, the dis-
tance (total revolu-
tions) you have ped-
aled, the approximate
number of calories you have burned, and the
approximate number of grams of carbs you have
burned. The display will change modes every few
seconds.
T
he lower right
display can show your
pedaling pace in revo-
lutions per minute
(
rpm) and the resis-
tance level of the ped-
a
ls. The display will change modes every few sec-
onds. The display will also show your heart rate
when you use the handgrip pulse sensor (see step
5 on page 16).
The left display will
show a track repre-
senting 640 revolu-
tions. As you exercise,
indicators will appear
in succession around
the track until the
entire track appears.
The track will then disappear and the indicators
will again begin to appear in succession.
To change the display mode, press the Display
button repeatedly until the desired exercise infor-
mation appears in the upper or lower right display.
After several seconds, the display will change
modes automatically as before.
To view the trip distance, press the Odometer but-
ton. The information will appear in the display for a
few seconds. To reset the trip distance, hold down
the Odometer button for a few seconds. To view
the total distance pedaled since the elliptical exer-
ciser was purchased, press the Odometer button a
second time. (Note: The number on the right side
of the display multiplied by the number on the left
side equals the trip distance or the total distance.)
To adjust the volume level of the console, first
press and hold down the Display button until the
display becomes blank. When you release the
Display button, the volume level will then appear in
the display. Press the increase and decrease but-
tons located above the Heart Rate buttons to
select a volume level. Then, press the Display but-
ton.
16
5
. Measure your heart rate if desired.
I
f there are
sheets of clear
plastic on the
metal contacts on
t
he handgrip
pulse sensor,
remove the plas-
tic. In addition,
make sure that
your hands are
clean. To measure
your heart rate,
hold the handgrip pulse sensor with your palms
resting against the metal contacts. Avoid moving
your hands or gripping the contacts tightly.
When your pulse is detected, a heart-shaped sym-
bol will flash in the display each time your heart
beats and then your heart rate will be shown. For
the most accurate heart rate reading, hold the con-
tacts for at least 15 seconds.
If your heart rate is not shown, make sure that
your hands are positioned as described. Be care-
ful not to move your hands excessively or to
squeeze the metal contacts tightly. For optimal
performance, clean the metal contacts using a soft
cloth; never use alcohol, abrasives, or chemi-
cals to clean the contacts.
6
. Turn on the fan if desired.
T
he fan has high, low, and auto speed settings;
while the auto mode is selected, the speed of the
fan will automatically increase or decrease as you
increase or decrease your pedaling speed. Press
t
he Fan button repeatedly to select a fan speed or
to turn off the fan. Note: If the pedals do not move
for about thirty seconds, the fan will turn off auto-
matically.
Pivot the thumb tab
on the right side of
the fan to adjust
the fan angle.
7. When you are finished exercising, the console
will turn off automatically.
If the pedals do not move for several seconds, a
series of tones will sound and the console will
pause.
If the pedals do not move for about five minutes,
the console will turn off and the displays will be
reset.
Contacts
Thumb
Tab
17
H
OW TO USE A PRESET WORKOUT
1. Press any button on the console or begin ped-
aling to turn on the console.
See step 1 on page 15.
2. Select a preset workout.
To select one of the four preset workouts, press
the Weight Loss, the Aerobic 1, the Aerobic 2, or
the Performance button on the left side of the con-
sole.
When you select a preset workout, the name of
the workout and the maximum resistance level will
appear in the display for a few seconds. Aprofile
of the resistance levels of the workout will also
scroll across the left side of the display.
3. Begin pedaling to start the workout.
Each workout is divided into 30 one-minute seg-
ments. One resistance level and one target pace
setting is programmed for each segment. Note:
The same resistance level and/or target pace set-
ting may be programmed for consecutive seg-
ments.
During the workout, the workout profile will show
your progress (see the drawing above). The flash-
ing segment of the profile represents the current
segment of the workout. The height of the flashing
segment indicates the resistance level for the cur-
rent segment. At the end of each segment of the
workout, a series of tones will sound and the next
segment of the profile will begin to flash. If a differ-
ent resistance level is programmed for the next
segment, the resistance level will appear in the
display for a few seconds to alert you. The resis-
tance of the pedals will then change.
D
uring the workout, the target pacer coach will
prompt you to keep your pedaling pace near the
target pace setting for the current segment. When
a left indicator lights, increase your pace; when a
right indicator lights, decrease your pace. When
the center indicator lights, maintain your current
p
ace. IMPORTANT: The target pacer coach is
intended only to provide a goal. Make sure to
pedal at a pace that is comfortable for you.
If the resistance level for the current segment is
too high or too low, you can manually override the
resistance level by pressing the Quick Resistance
buttons. However, when the current segment
ends, the resistance of the pedals will automatically
adjust to the resistance level for the next segment.
If you stop pedaling for several seconds, a series
of tones will sound and the workout will pause. To
restart the workout, simply resume pedaling. The
workout will continue until the last segment of the
workout ends.
4. Follow your progress with the displays.
See step 4 on page 15.
5. Measure your heart rate if desired.
See step 5 on page 16.
6. Turn on the fan if desired.
See step 6 on page 16.
7. When you are finished exercising, the console
will turn off automatically.
See step 7 on page 16.
18
HOW TO USE A HEART RATE WORKOUT
1. Press any button on the console or begin ped-
aling to turn on the console.
See step 1 on page 15.
2
. Select a heart rate workout.
To select one of the heart rate workouts, press the
Heart Rate 1 or the Heart Rate 2 button on the left
side of the console.
3. Enter a target heart rate setting.
A few seconds after
you select a heart rate
workout, the target
heart rate setting for the
workout will flash in the
lower right display.
During heart rate workout 1, the same target
heart rate setting will be programmed for all seg-
ments of the workout. If you have selected heart
rate workout 1, press the increase and decrease
buttons above the Heart Rate buttons to enter the
desired target heart rate setting (see EXERCISE
INTENSITY on page 22).
During heart rate workout 2, different target
heart rate settings will be programmed for different
segments of the workout. If you have selected
heart rate workout 2, press the increase and
decrease buttons above the Heart Rate buttons to
enter the desired maximum target heart rate set-
ting for the workout (see EXERCISE INTENSITY
on page 22).
4. Hold the handgrip pulse sensor.
It is not necessary to hold the handgrip pulse sen-
sor continuously during heart rate workouts; how-
ever, you should hold the handgrip pulse sensor
frequently for the workouts to operate properly.
Each time you hold the handgrip pulse sensor,
keep your hands on the metal contacts for at
least 30 seconds.
5. Begin pedaling to start the workout.
Heart rate workout 1 is divided into 40 one-
minute segments. Note: For a shorter workout,
stop exercising or select a different workout before
the workout ends.
H
eart rate workout 2 is divided into 30 one-
minute segments. One target heart rate setting is
programmed for each segment. Note: The same
target heart rate setting may be programmed for
consecutive segments.
During the workout, the workout profile in the dis-
play will show your progress. The flashing seg-
ment of the profile represents the current segment
of the workout. The height of the flashing segment
indicates the target heart rate setting for the cur-
rent segment. At the end of each segment of the
workout, a series of tones will sound and the next
segment of the profile will begin to flash.
During both workouts, the console will regularly
compare your heart rate to the target heart rate
setting for the current segment of the workout. If
your heart rate is too far below or above the target
heart rate setting, the resistance of the pedals will
automatically increase or decrease to bring your
heart rate closer to the target heart rate setting.
Each time the resistance changes, the resistance
level will appear in the display for a few seconds
to alert you.
19
While you exercise, the target pacer coach will
prompt you to maintain a constant pedaling speed.
When a left indicator lights, increase your pace;
when a right indicator lights, decrease your pace.
When the center indicator lights, maintain your
current pace. IMPORTANT: The target pacer
coach is intended only to provide a goal. Make
sure to pedal at a pace that is comfortable for
you.
If the resistance level for the current segment is
too high or too low, you can manually override the
resistance level by pressing the Quick Resistance
buttons. However, when the console compares
your heart rate to the target heart rate setting, the
resistance of the pedals may automatically
increase or decrease to bring your heart rate clos-
er to the target heart rate setting.
If you stop pedaling for several seconds, a series
of tones will sound and the workout will pause. To
restart the workout, simply resume pedaling. The
workout will continue until the last segment of the
workout ends.
6. Follow your progress with the displays.
See step 4 on page 15.
7. Turn on the fan if desired.
See step 6 on page 16.
8. When you are finished exercising, the console
will turn off automatically.
See step 7 on page 16.
HOW TO USE AN IFIT WORKOUT
iFit cards are available separately. To purchase iFit
cards, go to www.iFit.com or see the front cover of this
manual. iFit cards are also available at select stores.
1. Press any button on the console or begin ped-
aling to turn on the console.
See step 1 on page 15.
2. Insert an iFit card and select a workout.
To use an iFit workout, insert an iFit card into the
iFit slot; make sure that the iFit card is oriented so
the metal contacts are face down and are facing
the slot. When the iFit card is properly inserted,
the indicator next to the slot will turn on and the
word IFIT will appear in the display.
Next, select the desired workout on the iFit card
by pressing the increase and decrease buttons
next to the iFit slot.
A moment after you select a workout, the voice of
a personal trainer will begin guiding you through
your workout. iFit workouts work in the same way
as preset workouts. To use the workout, see steps
3 to 7 on page 17.
3. When you are finished exercising, remove the
iFit card.
Remove the iFit card when you are finished exer-
cising. Store the iFit card in a secure place.
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the consoleʼs
sound system while you exercise, plug the audio cable
into the jack on the console and into a jack on your
MP3 player or CD player; make sure that the audio
cable is fully plugged in.
Next, press the play button on your MP3 player or CD
player. Adjust the volume of the speaker using the vol-
ume control on your MP3 player or CD player. Note:
You can also adjust the volume of the console as
described in step 4 on page 15.
iFit Slot
iFit Card
20
MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the elliptical exerciser
r
egularly. Replace any worn parts immediately.
To clean the elliptical exerciser, use a damp cloth and
a small amount of mild soap. IMPORTANT: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
HOW TO ADJUST THE DRIVE BELT
If the pedals slip while you are pedaling, even while
the resistance is adjusted to the highest setting, the
drive belt may need to be adjusted.
To adjust the drive belt, see assembly steps 8 and 9
on pages 9 and 10 and remove the Left Pedal Leg
(24) and the Left Link Arm (25).
Then, see EXPLODED DRAWINGAnear the end of
this manual and remove the M6 x 25mm Button Screw
(61) from the center of the left Crank Arm Cover (32),
and then carefully remove the left Crank Arm Cover.
Note: You may have to remove a decal from the Crank
Arm Cover before you can remove the Button Screw.
Next, remove all the screws from the left shield, and
then carefully remove the left shield.
Loosen, but do
not remove, the
three M6 x 25mm
Button Screws
(61). Insert the
shaft of a screw-
driver downward
between the Idler
(12) and the pul-
ley located on the
Eddy Mechanism
(10). Pull the top
of the screwdriver
toward the rear of
the elliptical exerciser until the Belt (68) is tight, and
then tighten the three screws.
Reattach the left shield and the left crank arm cover.
Then, see assembly steps 8 and 9 on pages 9 and 10
and reattach the left pedal leg and the left link arm.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted.
To adjust the reed switch, first see EXPLODED
DRAWINGA near the end of this manual and loosen
the M6 x 25mm Button Screw (61) in the center of the
right Crank Arm Cover (32), and then carefully rotate
the right Crank Arm Cover out of the way.
Locate the Reed Switch (21). Loosen, but do not
remove, the indicated M4 x 16mm Screw (72). Slide
the Reed Switch slightly closer to or away from a
Magnet (18) on the Pulley (13).
Then, retighten the M4 x 16mm Screw (72). Turn one
of the Crank Arms (31) for a moment. Repeat until the
console displays correct feedback.
When the reed switch is correctly adjusted, replace
the crank arm cover.
21
18
13
72
31
10
61
12
68
21
CONSOLE TROUBLESHOOTING
If the console display becomes dim, the batteries
s
hould be replaced; most console problems are the
result of low batteries. See assembly step 5 on page 8
f
or replacement instructions.
If the console does not display your heart rate when
you hold the handgrip pulse sensor, or if the displayed
heart rate appears to be too high or too low, see step
5 on page 16.
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical exerciser rocks slightly on your floor
d
uring use, turn one or all of the leveling feet beneath
the track until the rocking motion is eliminated.
HOW TO GREASE THE ROLLERS
See the EXPLODED DRAWING near the end of this
manual.
If the Rollers (27) squeak when moving on the Track
(2), apply a small amount of white marine grease
equally to each Roller. Spread the grease evenly
around the Rollers. Pedal the elliptical exerciser until a
thin film of grease is distributed along the Track; wipe
off any excess grease.
22
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper inten-
sity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the near-
est ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
Burning Fat—To burn fat effectively, you must exer-
cise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
WORKOUT GUIDELINES
Warming Up—Start with 5 to 10 minutes of stretching
and light exercise. Awarm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Training Zone Exercise—Exercise for 20 to 30 min-
utes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise–never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of
stretching. Stretching increases the flexibility of your
muscles and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exer-
cise, you may complete up to five workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.
EXERCISE GUIDELINES
WARNING:B
efore beginning this
or any exercise program, consult your physi-
cian. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
23
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right.
M
ove slowly as you stretch—never bounce.
1
. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times. Stretches: Hamstrings, back of knees,
and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back, and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat
3 times for each leg. To cause further stretching of the achilles
tendons, bend your back leg as well. Stretches: Calves, achilles
tendons, and ankles.
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your
buttocks as possible. Hold for 15 counts, then relax. Repeat 3
times for each leg. Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for
15 counts, then relax. Repeat 3 times. Stretches: Quadriceps and
hip muscles.
1
2
3
4
5
24
1
1 Frame
21Track
31Upright
41Console
52Selector
61Water Bottle Holder
71Track Cover
82Wheel
93Leveling Foot
10 1 Eddy Mechanism
11 1 Mechanism Axle
12 1 Idler
13 1 Pulley
14 1 Crank
15 2 Crank Bearing
16 1 Resistance Motor
17 1 Resistance Cable
18 2 Magnet
19 2 Upright Bushing
20 1 Clamp
21 1 Reed Switch/Wire
22 1 Left Upper Body Arm
23 1 Left Upper Body Leg
24 1 Left Pedal Leg
25 1 Left Link Arm
26 2 Pedal
27 2 Roller
28 4 LinkArm Bushing
29 2 RollerAxle
30 2 Roller Cover
31 2 CrankArm
32 2 CrankArm Cover
33 1 Left Shield
34 2 Upper Body Leg Cap
35 2 Pedal Leg Cap
36 1 Right Upper Body Arm
37 1 Right Upper Body Leg
38 1 Right Pedal Leg
39 1 Right Link Arm
40 1 Right Shield
41 1 PivotAxle
42 2 Inner Pivot Bushing
4
3 2 Outer Pivot Bushing
44 4 LargeAxle Cover
45 8 CrankArm Bushing
46 4 SmallAxle Cover
47 4 Selector Bushing
48 2 SelectorAxle
49 4 M10 x 16mm Button Screw
50 2 Key
51 14 M6 x 12mm Button Screw
52 8 M10 x 25mm Washer
53 12 M8 x 16mm Button Screw
54 10 M8 x 25mm Washer
55 4 M8 Split Washer
56 2 Snap Ring
57 2 M10 x 35mm Shoulder Screw
58 4 M10 x 20mm Button Screw
59 4 M4 x 12mm Flange Screw
60 2 M4 x 12mm Screw
61 5 M6 x 25mm Button Screw
62 3 M6 Flange Nut
63 3 M6 Fender Washer
64 2 M10 Flange Nut
65 2 M8 x 50mm Button Screw
66 2 16mm Wave Washer
67 4 M8 x 30mm Button Screw
68 1 Belt
69 2 M8 x 50mm Hex Bolt
70 2 M8 Locknut
71 4 19mm Wave Washer
72 11 M4 x 16mm Screw
73 1 Wire Harness
74 2 Foam Grip
75 6 M4 x 19mm Screw
76 4 M4 x 50mm Screw
77 4 M8 x 20mm Button Screw
78 2 Upper Body Arm Cap
79 1 Audio Cable
80 2 M8 x 35mm Button Screw
*–Assembly Tool
*–Grease Packet
*–Userʼs Manual
Key No. Qty. Description Key No. Qty. Description
PART LIST—Model No. PFEL04909.0 R1109A
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
25
EXPLODED DRAWING A—Model No. PFEL04909.0 R1109A
22
23
24
25
26
27
28
28
29
30
31
32
33
34
35
42
43
44
45
45
45
45
46
46
44
50
51
54
52
52
77
58
58
61
77
53
53
67
69
70
71
72
72
72
72
72
66
71
54
54
60
78
74
54
47
47
5
49
52
49
52
51
51
51
48
26
1
2
3
4
6
7
8
8
9
9
9
10
11
12
13
14
15
15
16
17
18
18
19
19
20
21
53
53
55
55
56
56
57
57
53
53
59
61
62
63
64
64
53
75
75
72
76
73
65
54
68
75
79
80
80
EXPLODED DRAWING B—Model No. PFEL04909.0 R1109A
27
27
28
28
29
30
31
32
34
36
37
39
40
41
42
43
44
45
45
46
44
50
51
54
52
77
58
61
77
53
53
69
70
71
72
72
66
78
54
54
74
26
35
38
45
45
46
52
58
51
60
71
54
47
47
5
49
52
49
52
48
51
51
67
EXPLODED DRAWING C—Model No. PFEL04909.0 R1109A
Part No. 289170 R1109A Printed in China © 2009 ICON IP, Inc.
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. The frame is warranted for seven (7) years from the
date of purchase. Parts and labor are warranted for ninety (90) days from the date of purchase.
This warranty extends only to the original purchaser. ICONʼs obligation under this warranty is limited to
repairing or replacing, at ICONʼs option, the product through one of its authorized service centers. All
repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped to
a service center, freight charges to and from the service center will be the customerʼs responsibility. For
replacement parts shipped while theproduct isunder warranty, thecustomer willbe responsiblefor amin-
imalhandlingcharge. Forin-home service,the customerwill beresponsible fora minimaltripcharge.This
warranty does notextend to any damage toa product caused by orattributable to freight damage,abuse,
misuse, improper or abnormal usage, or repairs not provided by an ICON authorized service center; to
products used for commercial or rental purposes or as store display models; or to products transported
or purchased outside the US. No other warranty beyond that specifically set forth above is authorized by
ICON.
ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in con-
nection with the use or performance of the product; damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or other
consequential damagesof whatsoever nature. Somestates do notallow the exclusion orlimitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of
merchantability or fitness for a particular purpose are limited in their scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights that vary from state to state.
ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813
LIMITED WARRANTY
IMPORTANT: You must register this product within 30 days of the purchase date to avoid added
fees for service needed under warranty. Go to www.proformservice.com/registration
… 21 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pro-form 490 STRIDE CLIMBER - PFEL04909 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pro-form 490 STRIDE CLIMBER - PFEL04909 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info