573702
4
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
4
contact your vehicle’s manufacturer for vehicle specific wiring diagrams. Alternatively
you can just look for a 12V / 24V power supply.
6. The reverse light sockets on most vehicles have two wires
connected to them. Usually the negative wire is black and the
positive wire is a coloured wire. If you are uncertain about the
wiring, you can use a 12/24 volt multimeter available at most auto
parts stores to determine which is the positive wire. Follow the
manufacturer’s instructions for the safe use of the multimeter.
7. After determining which wire is the positive and which is the
negative, turn off the ignition key, then remove the battery’s
negative cable.
8. Connect the GREEN wire (TRIGGER for back camera) of the
monitor wireloom to reverse light’s positive(+)
9. Replace the reverse light bulb, and then re-install the light socket. Secure all the
wires with cable ties or electrical tape. This trigger cable has priority compared to
other trigger cables. When in reverse it shows always the back up camera.
10. Re-attach the negative battery cable to the battery.
11. Plug the camera to CAM-B (CAMERA BACK).
12. If LEFT/FRIGHT/FRONT cameras are optioned, please connect the trigger wire
according to above diagram. And plug the camera to each connector respectively.
Connect BROWN wire to e.g. brake trigger (+), and plug camera to CAM-F (CAMERA
FRONT)
Connect WHITE wire to e.g. left turning signal trigger (+), and plug camera to CAM-L
(CAMERA LEFT)
Connect BLUE wire to e.g. right turning signal trigger (+), and plug camera to CAM-R
(CAMERA RIGHT)
Monitor Installation
When choosing a location to mount the monitor, make sure the monitor is in an
area that will not obstruct your vision while driving.
The RVC7040N can be fixed in your vehicle on your dashboard or upside down on the
roof with the dashboard stand.
A. On Dashboard
1. Before mounting the monitor, clean the dashboard surface well.
2. Position the stand to the dashboard surface which suits your requirement.
3. Stick the double-side tape foam at the bottom of the stand. Alternatively screw in the
screws into the dashboard.
4. Press the stand against the dashboard surface to fix the location.
5. Snap in the monitor to the stand mounting arm.
6. Adjust the mounting arms to suit your view angle to the monitor.
On dashboard
On roof
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Pro-User RVC7040N bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Pro-User RVC7040N in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info