Place the removable pan (10) into the
appliance (fig. B1).
If necessary, mount the oil/liquid fat pump
(9) to the connection (15) of the electronic
control unit (6). Tighten the oil/liquid fat
pump (9) by turning it counterclockwise
(fig. B2).
Mount the electronic control unit (6) to the
appliance. Make sure that the guides (16)
on the electronic control unit slide into the
guides (17) on the appliance (fig. B3).
Place the basket cover (13) onto the
basket (11) (fig. B4).
Place the basket (11) into the removable
pan (10) (fig. B5).
Place the lid (8) onto the appliance. Make
sure that the guides (18) on the lid slide
into the guides (19) on the electronic
control unit (fig. B6).
Note: Make sure that the basket grip (12) fits
in the openings of the lid (8). If the lid (8) is not
positioned correctly, the oil/liquid fat pump (9)
will not operate.
Use
Setting the deep-frying
temperature (fig. A)
The temperature can be adjusted from 150 °C
to 190 °C in steps of 10 °C. The temperature
can be read from the digital display (4).
Repeatedly press the temperature button
(2) until the digital display (4) shows the
required temperature.
Note: It is not possible to adjust the temperature
during the process. To adjust the temperature,
switch off the appliance, adjust the settings,
and switch on the appliance again.
Setting the deep-frying time (fig. A)
The time can be adjusted from 1 minute to
45 minutes in steps of 1 minute. The time can
be read from the digital display (4).
Press the ’+’ button of the time button (3) to
increase the time. If you keep the ’+’ button
pressed, the time will increase more quickly.
Press the ’-’ button of the time button (3) to
decrease the time. If you keep the ’-’ button
pressed, the time will decrease more quickly.
If a 13Amp (BS1363) plug is used, a 13Amp
(BS1362) fuse must be fitted, or if any other
type of plug is used, a 13Amp fuse must be
fitted, either in the plug or adaptor, or on the
distribution board.
Warning! This appliance must be earthed.
Description (fig. A)
Your 184001 Princess deep fryer been designed
for deep-frying food using oil or liquid fat.
The appliance is not suitable for deep-frying
food using solid fat. The appliance is suitable
for domestic use only.
1. On/off button
2. Temperature button
3. Time button
4. Digital display
5. Reset button
6. Electronic control unit
7. Handgrip
8. Lid
9. Oil/liquid fat pump
10. Removable pan
11. Basket
12. Basket grip
13. Basket cover
Initial use
Clean the appliance.
Refer to ”Cleaning and maintenance”.
Clean the accessories.
Refer to ”Cleaning and maintenance”.
Assembly
Warning! Before assembly, always remove
the mains plug from the wall socket.
Assembling the appliance (fig. B)
Caution!
- If you use the appliance as a shower fryer,
the oil/liquid fat pump must be mounted to
the electronic control unit.
- If you use the appliance as a regular fryer,
the oil/liquid fat pump must not be mounted
to the electronic control unit.
