636661
36
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
36
Problem
I can’t hear anything (no
volume) from the speaker.
I can transmit, but no one
can hear me.
Thedisplayashes,andI
don’t know why.
I can’t read the display.
The display is too bright
at night.
I can’t see any words on
the display.
I’m not getting any GPS
data on my display.
I’m not getting any hazard
alerts.
I’m getting all the hazard
alerts, not just the ones for
my area.
Ican’tmakeGroupDSC
calls.
WherecanIndmy
radio’sserialnumber?
The radio won’t let me
enter my User MMSI.
WhatdoIdo?
Things to Try
Adjust the squelch level; it is probably too high.
Check your UIC channel settings (see Setting the UIC channel mode
(USA/CAN/INT) on page 8).
Thedisplaywillashiftheradioisinawatchmodeorinscanmode.
Tryturningoffscanning,WeatherAlertWatch,orTriple/DualWatch
(see page 16.)
Adjust the contrast and backlight brightness level (see page 18)
Adjust the backlight brightness level.
Turn off the radio; hold CALL-MENU button and turn it back on (see
page 18)
Reset the radio back to the default brightness level: turn off the radio;
hold the CALL-MENU button and turn it back on.
Make sure your GPS receiver is correctly connected (see Connecting
to a GPS receiver, page 32).
Make sure your GPS receiver is working properly. Make sure that your
GPS receiver supports the NMEA parameters described in NMEA
Operation on page 45.
Make sure Weather Alert Watch is turned on.
Check to make sure the FIPS codes in your radio include your current
location (see Using FIPS codes for weather alerts on page 17).
Check to make sure the FIPS codes in your radio were entered cor-
rectly (see Using FIPS codes for weather alerts on page 17). Some-
times the Weather Alert Watch may catch a hazard alert in the middle
of the broadcast and miss which FIPS codes are affected. For your
safety, the radio triggers the alert tone and switches to the weather
channel when this happens.
Make sure the Group MMSI was entered correctly.
Look on the right side of the radio (the side with the microphone cord),
behind the mounting bracket.
Contact customer service.
Engine Noise Suppression
Interference from the noise generated by the electrical systems of engines is sometimes a
problem with radios. Your radio has been designed to be essentially impervious to ignition
noise and alternator noise. However, in some installations it may be necessary to take meas-
urestofurtherreducetheeffectofnoiseinterference.Yourradio’sDCbatterywires,antenna
lead, and accessory cables should be routed away from the engine and engine compart-
ment, and from power cabling carrying high currents. In severe cases of noise interference, it
may be necessary to install a noise suppression kit. Contact the dealer where you purchased
the radio for more information.
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw President MC 8000 DSC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van President MC 8000 DSC in de taal/talen: Engels als bijlage per email.

De handleiding is 1,9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van President MC 8000 DSC

President MC 8000 DSC Gebruiksaanwijzing - Deutsch - 36 pagina's

President MC 8000 DSC Gebruiksaanwijzing - English - 40 pagina's

President MC 8000 DSC Gebruiksaanwijzing - Français - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info