517142
9
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
POWXG1006 EN
Copyright © 2015 VARO P a g e | 9 www.varo.com
9.7 Chain lubricants
The service life of saw chains and guide bars depends to a large extent on the quality of the
lubricant used. Old oil must not be used! Use only environment-friendly chain lubricant. Store
chain lubricant only in containers which comply with the regulations.
9.8 Guide bar
The guide bar (7) is subjected to especially severe wear and tear at the nose and the bottom.
To avoid one-sided wear and tear, turn the guide bar over every time when you sharpen the
chain.
9.9 Chain wheel
The chain wheel (16) is subjected to especially high wear and tear. If you notice deep wear
marks on the teeth, the chain wheel must be replaced. A worn chain wheel curtails the service
life of the saw chain. Have the chain wheel replaced by a specialist dealer or your Customer
Service.
9.10 Chain guard
The chain guard must be clipped onto the chain and sword as soon as the sawing work has
been completed and whenever the chainsaw has to be transported.
9.11 Chain brake
In the event of kick-back, the chain brake (3) will be actuated via the front finger guard. The
front finger guard is pushed forwards by the back of the hand and this causes the chain brake
to stop the chain saw, or rather the motor, within 0.15 s (Fig 5, I).
9.12 Releasing the chain brake (Fig 5)
To be able to use your chain saw again, you must release the saw chain again. First switch off
the chainsaw. Then push the front finger guard (3) back into the vertical position until it locks in
place (Fig 5, H). The chain brake is now fully functional again.
9.13 Sharpening the saw chain
You can have your saw chain sharpened fast and correctly by specialist dealers, from whom
you can also obtain chain sharpening equipment to enable you to sharpen the chain yourself.
Please follow the corresponding operating instructions.
Take care of your tools. Keep your tools sharp and clean to enable you to work well and safely.
Follow the maintenance regulations and the instructions for changing tools
10 STARTING UP
Always wear safety goggles, ear muffs, protective gloves and heavy-duty
work clothes!
Use the saw only with approved extension cables with the prescribed insulation and
connections designed for outdoor use (approved rubber-sheathed cables) which fit the
chainsaw plug.
The chain saw is equipped with two safety switches, requiring the use of both hand
The chainsaw works only when one hand holds the front grip (2) and the other hand actuates
the switch on the rear grip (1).
If the chainsaw does not run, the chain brake must be released at the front finger guard (3). Be
sure to read the sections Chain brake and Releasing the chain brake on this point.
After switching on, the chainsaw will run immediately at high speed .
9

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Powerplus-POWXG1006

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWXG1006 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWXG1006 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Powerplus POWXG1006

Powerplus POWXG1006 Gebruiksaanwijzing - Nederlands - 15 pagina's

Powerplus POWXG1006 Gebruiksaanwijzing - Deutsch - 15 pagina's

Powerplus POWXG1006 Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info