675037
10
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
POWX221 EN
Copyright © 2017 VARO P a g e | 10 www.varo.com
8.2 Lengthwise sawing with a(vertical) mitre
This method is practically the same, except that the saw blade is placed at the angle required.
With this type of method the fence may only be along the righthand side of
the sawblade.
8.3 Lengthwise sawing of narrow workpieces.
Assume that this process is extremely dangerous.
Take all the necessary safety measures and continually push the workpiece through (until
behind the saw blade) using a synthetic aid instead of by hand.
8.4 Crosswise sawing
Remove the fence and apply the cross-cut fence in the righthand carriage.
Adjust the height of the saw blade (see lengthwise sawing).
Press the workpiece against the cross-cut fence and keep at least 2,5 cm distance from
the front of the saw blade.
Switch on the engine and wait until the maximum number of revolutions has been
reached.
Press the workpiece against the fence and the bench. Carefully push the wood through
the saw blade. Continue until behind the saw blade. Then switch off the engine and keep
this position until the saw blade has stopped completely before you remove the wood.
Never pull the wood back. If necessary, switch the engine off and keep the position until
the saw blade has stopped completely.
8.5 Crosswise sawing with a vertical mitre
This method is practically the same, except that the saw blade is placed in the angle required.
Only place the cross-cut fence on the righthand side of the saw blade.
Never saw too small pieces of wood. Never use your hands to carry out
difficult operations.
8.6 Crosswise sawing with a horizontal mitr
With this method the cross-cut fence must be secured at the angle required. Keep the
workpiece pressed firmly against the cross-cut fence and the bench before you start cutting off.
9 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
9.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX221 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX221 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX221

Powerplus POWX221 Gebruiksaanwijzing - Nederlands - 14 pagina's

Powerplus POWX221 Gebruiksaanwijzing - Deutsch - 15 pagina's

Powerplus POWX221 Gebruiksaanwijzing - Français - 14 pagina's

Powerplus POWX221 Aanvulling / aanpassing - Alle talen - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info