480958
6
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
POWX131 EN
Copyright © 2015 VARO P a g e | 6 www.varo.com
Keep mains lead clear from working range of the machine. Always lead the cable away
behind you.
The base plate must not be clamped down while the blade is extended. Lowering and
raising the blade must be a smooth operation,
7 ADJUSTMENTS
7.1 Adjusting the cutting depth
Move the motor base (14) as far as possible backwards.
Set the cutting depth by luring the cutting depth adjustment knob (6).
Move the motor base forwards and check if the pin will fall in the notch of the adjustment
knob.
7.2 Adjusting the cutting angle
The cutting angle can be set by unlocking the clamping knob (7} and put the angle stop (4)
in the required angle.
7.3 Adjusting the height
The correct height can be set by unlocking The clamping Knob (8) and turning The knob
for the height adjustment (9) to the desired height with aid of the scale (10)
The height must corresponds to half of the material Thickness of the work piece, the
groove lot the biscuit dowel must always be in The middle of the working piece
8 ASSEMBLAGE
ATTENTION! Disconnect the power plug before carrying out any
adjustments or maintenance..
8.1 Mounting saw blade
Loosen your screws and open the top of the base plate
Press the spindle lock and turn the spindle until it engages in the lock. Keep the spindle
lock pressed during this procedure.
Remove the flange nut from The spindle using the wrench.
Position the saw blade and the flange.
Place the flange nut from the spindle and tighten II with The wrench.
Take care that the flange nut will be placed with the correct aide on the spindle.
Release the spindle lock and check that the spindle is unlocked by rotating it.
Close the top of the base plate and fasten four screws.
Make sure that the top of the base plate is securely closed before operating
the machine.
8.2 Mounting dust bag
For dust extraction the dust bag can be used. Insert the dust bag into the vacuuming
Connection. Empty the dusts bag regularly so that the vacuuming performance remains intact.
9 OPERATION
9.1 Switching on and off.
Never use the spindle lock until the machine is working.
To switch the machine on slide the on/off switch forwards.
To switch the machine off, depress the on/off switch, the switch will automatically move in
the "off" position.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Powerplus-POWX131

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX131 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX131 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX131

Powerplus POWX131 Gebruiksaanwijzing - Nederlands - 11 pagina's

Powerplus POWX131 Gebruiksaanwijzing - Nederlands - 11 pagina's

Powerplus POWX131 Gebruiksaanwijzing - Deutsch - 11 pagina's

Powerplus POWX131 Gebruiksaanwijzing - Français - 11 pagina's

Powerplus POWX131 Aanvulling / aanpassing - Alle talen - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info