582664
10
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
POWX0561 EN
Copyright © 2014 VARO P a g e | 10 www.varo.com
The cutting width marks (15) show the most foremost and rearmost cutting points of the
saw blade (Ø 165 mm) at maximum cutting depth and when using the guide rail.
10.9 Replacing the saw blade
Before any maintenance work always switch off the plunge saw and
disconnect from mains power.
Loosen both rotary knobs (8) and swivel the plunge saw to 0° position before changing the
saw blade. Tighten the rotary knobs again.
Set the selector switch (17) to the change saw blade icon.
Press the switch lock (2) down and push the motor down.
Press and hold the spindle arrester down.
Use a 5 mm Allen key to turn the screw at the saw blade slightly clockwise or counter-
clockwise until the spindle clicks into place.
Use the Allen key to loosen the screw counter-clockwise. Remove the outer flange and the
saw blade.
Clean both flanges and replace the saw blade.
Note: The rotation direction arrows of saw blade and saw must be aligned!
Replace the outer flange in such way that the slaving pins sit in the recesses of the inner
flange.
Press and hold the shaft lock b utton and tighten the screw. Press the switch lock (2) for
the casing to swivel up again.
11 FINE ADJUSTMENT OF PLUNGE SAW PLAY ON GUIDE RAIL
The play of the base plate on the guide rail can be reduced to minimum with the fine
adjustment screws (7).
Loosen the fine adjustment screws counter-clockwise.
Turn both fine adjustment screws (7) clockwise to minimize the play between base plate
and guide rail, if necessary.
Fasten the fine adjustment screws clockwise.
12 CONNECTING RODS FOR GUIDE RAILS (FIG. 7)
To connect both guide rails slide the first connecting rod from the bottom into the groove of
the guide rail.
Slide the other connecting rod into the second groove.
Use the 3 mm Allen key to tighten the stud screws to the limit stop to connect the rails.
13 GUIDE RAIL SPLINTER GUARDS (FIG. 8)
The guide rails come with a splinter guard (black protruding rubber lip). The splinter guard
should be cut to size before first use. The splinter guard ensures a tear-free cut, since the
wood fibers at the top of the work piece are torn without splinter guard. This is due to the saw
blade teeth being directed upward.
After cutting the splinter guard to size it also shows the precise cutting path of the saw blade.
Mark a cutting line on the work piece and align the guide rail exactly with this cutting line.
Fix the guide rail with clamps on the work piece.
Set the selector switch to marked cut function. Set the plunge saw speed to 6.
Place the plunge saw at the rear end of the guide rail.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX0561 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX0561 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX0561

Powerplus POWX0561 Gebruiksaanwijzing - Nederlands - 15 pagina's

Powerplus POWX0561 Gebruiksaanwijzing - Deutsch - 15 pagina's

Powerplus POWX0561 Gebruiksaanwijzing - Français - 15 pagina's

Powerplus POWX0561 Aanvulling / aanpassing - Alle talen - 5 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info